We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB DDR5 5600MHz CL46 2Rx4 ECC RDIMM Supermicro H13SVW-NT memory upgrade

SKU CH-9P8Z-8AJKK

64GB DDR5 5600MHz ECC registered RDIMM validated for Supermicro H13SVW-NT motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Speed 5600MHz

  • 64 GB capacity lets the Supermicro H13SVW-NT run large workloads without swapping
  • DDR5 5600 MT/s speed matches the board's rated frequency for full bandwidth
  • CL46 latency and 1.1 V operation meet the controller's exact timing and power requirements
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor is the precise slot type the motherboard requires

64GB DDR5 5600MHz ECC RDIMM

This NEMIX RAM module delivers 64GB of DDR5 registered ECC memory rated at 5600MHz with CL46 latency. It uses a 2Rx4 organization and operates at 1.1V across 288 pins. The part is built as a direct upgrade for the Supermicro H13SVW-NT motherboard.

Suited for populated server builds, not consumer PCs

This registered DIMM targets administrators expanding a Supermicro H13SVW-NT system with error-correcting, buffered memory that supports full-slot populations. Builders needing unbuffered UDIMMs or SODIMM form factors for workstations or laptops cannot use this module.

Registered 2Rx4 ECC at 1.1V decides fit

The single specification that determines compatibility is the registered 2Rx4 ECC architecture running at 1.1V. Only motherboards that require this exact rank, voltage, and buffering scheme will recognize the full 64GB capacity at the rated 5600MHz speed.

Highlights

  • 64 GB capacity lets the Supermicro H13SVW-NT run large workloads without swapping
  • DDR5 5600 MT/s speed matches the board's rated frequency for full bandwidth
  • CL46 latency and 1.1 V operation meet the controller's exact timing and power requirements
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor is the precise slot type the motherboard requires

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard slot does the 288-pin DDR5 RDIMM require on the Supermicro H13SVW-NT?

The module fits a standard 288-pin DDR5 RDIMM slot on the Supermicro H13SVW-NT motherboard; it is not compatible with UDIMM or SODIMM sockets.

Which DIMM population order should I follow when installing this 2Rx4 registered ECC module?

Install the RDIMM in the sequence specified by the Supermicro H13SVW-NT manual for registered ECC memory to ensure full 64 GB capacity and 5600 MHz operation.

Does the lack of a heat spreader on this 1.1 V DDR5 module affect long-term reliability?

The module is rated for 1.1 V operation without a heat spreader; server chassis airflow normally keeps temperatures within specification for continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.