NEMIX RAM
NEMIX RAM 768GB 12x64GB DDR5 5600 CL46 ECC RDIMM Supermicro H14SST-G memory upgrade
A 768GB DDR5 kit of twelve 64GB registered ECC RDIMMs at 5600MHz CL46 1.1V, validated for Supermicro H14SST-G motherboards
- Capacity768GB (12 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 768 GB total capacity from twelve 64 GB modules for maximum server density
- DDR5-5600 speed with CL46 latency delivers rated bandwidth at 1.1 V
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 288-pin RDIMM form factor matches the Supermicro H14SST-G slot requirement exactly
- 2Rx4 dual-rank organization enables full-population stability across all channels
Exact-match 768 GB DDR5 kit
This NEMIX RAM kit delivers 768 GB through twelve 64 GB DDR5-5600 RDIMMs. Each module is a 2Rx4 registered ECC part rated at CL46 and 1.10 V. The kit is built to the precise rank, voltage and timing the Supermicro H14SST-G memory controller expects for full-capacity recognition and rated-speed operation.
Verify manual before ordering
Server and motherboard memory support varies by model, so consult your system or motherboard manual for supported capacities, approved DIMM population order and installation steps. The board requires 288-pin registered RDIMMs, not UDIMMs or SODIMMs, and the population rules must be followed to avoid POST failures.
Registered ECC for full-slot stability
Registered architecture offloads the memory controller so every slot can run fully populated at full capacity. On-the-fly ECC corrects single-bit errors to prevent silent data corruption and unplanned reboots. The modules have no heat spreaders, so ensure your chassis airflow meets the platform's thermal requirements.
Highlights
- 768 GB total capacity from twelve 64 GB modules for maximum server density
- DDR5-5600 speed with CL46 latency delivers rated bandwidth at 1.1 V
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 288-pin RDIMM form factor matches the Supermicro H14SST-G slot requirement exactly
- 2Rx4 dual-rank organization enables full-population stability across all channels
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K12 |
| Capacity | 768GB (12 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 12X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does the kit include all 12 modules or must any be purchased separately?
The package contains the complete 768GB kit — 12 modules of 64GB each — so nothing extra is required for a full installation.
Should I choose a different capacity or speed for the Supermicro H14SST-G?
This 12x64GB DDR5 5600 CL46 kit matches the board's exact specifications; other capacities or speeds would deviate from the validated configuration.
Will the CL46 latency and 5600 speed run at rated values once installed?
Yes, the modules are spec-matched to the motherboard's memory controller, so they are recognised at full 768GB capacity and operate at DDR5 5600 with CL46 timing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



