We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 laptop memory sticks, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 8GB (2×4GB) DDR3 1600MHz CL11 1.35V 204-pin SODIMM

SKU CH-RAST-33V8W

An 8 GB DDR3 laptop memory kit with two 4 GB modules running at 1600 MHz and 1.35 V

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • Boosts system responsiveness with 8 GB dual-channel kit
  • Runs at 1600 MHz for faster data throughput
  • Low 1.35 V operation reduces power draw
  • 204-pin SODIMM fits standard laptop slots
  • CL11 latency keeps timing tight

Capacity and form factor

This kit supplies 8 GB of DDR3 memory in two 4 GB SODIMM modules. The 204-pin layout is standard for laptops, all-in-one PCs, small-form-factor desktops and compatible NAS devices. Unbuffered, non-ECC operation suits mainstream consumer platforms. The modules run at 1.35 V and carry a CL11 latency rating.

Compatibility guidance

Builders upgrading DDR3-based laptops, AIOs, SFF systems or supported NAS units can use this kit. Systems that require ECC, registered DIMMs, a different pin count or a voltage other than 1.35 V will not accept these modules. Buyers needing more than 8 GB total capacity should look at larger kits.

Deciding specification

The 1600 MHz speed (PC3-12800) is the single figure that determines whether this memory matches the platform. If the host system specifies DDR3-1600 SODIMMs at 1.35 V with CL11 timing, the kit is a direct fit. Any other speed or voltage requirement means a different module is needed.

Highlights

  • Boosts system responsiveness with 8 GB dual-channel kit
  • Runs at 1600 MHz for faster data throughput
  • Low 1.35 V operation reduces power draw
  • 204-pin SODIMM fits standard laptop slots
  • CL11 latency keeps timing tight

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMS12800-428LK2
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the kit runs at DDR3 1600 with CL11 after installing it in my laptop?

Open Task Manager or CPU-Z and confirm the memory frequency shows 1600 MT/s and the CAS latency reads 11 cycles.

Does the package include only the two 4 GB SODIMM modules or are any tools or adapters supplied?

The kit contains two 204-pin DDR3 SODIMM modules; no screwdriver, adapter or extra hardware is included.

Should I choose the 1.35 V CL11 version or a different voltage and latency for my DDR3 laptop?

Select this 1.35 V CL11 kit when your system specifies DDR3 1600 PC3-12800 low-voltage memory; other voltages or timings may not be compatible.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.