NEMIX RAM
NEMIX RAM 8GB DDR3 1600 PC3-12800 CL11 1.35V 240-Pin UDIMM Dell A7415827
An 8 GB DDR3 desktop module rated at 1600 MHz with CL11 latency and 1.35 V operation
- Capacity8GB
- Type240-Pin DDR3 UDIMM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 8 GB capacity supports demanding multitasking workloads
- DDR3 1600 speed delivers 12800 MB/s bandwidth
- CL11 latency keeps response times low
- 35 V operation reduces power draw and heat
- 240-pin UDIMM fits standard desktop motherboards
Dell-compatible 8 GB DDR3 module
This NEMIX RAM stick delivers 8 GB of DDR3 memory at 1600 MT/s with CL11 latency. It fits 240-pin UDIMM slots and runs at 1.35 V. The module is validated for Dell part A7415827 and uses major-brand DRAM chips from Samsung, Micron or Hynix.
Sustained-load stability
Every unit is stress tested under continuous load before shipment to verify reliable operation during long work sessions. The unbuffered, non-ECC design keeps signal paths short for consistent throughput in desktop workloads. No heat spreader is fitted, so airflow in the chassis handles thermal management.
CL11 timing at 1600 MT/s
The CAS latency of 11 cycles at the rated 1600 MT/s speed determines responsiveness in memory-bound tasks. Matching this timing with existing modules avoids down-clocking and preserves bandwidth. Verify that the platform supports 1.35 V operation before installation.
Highlights
- 8 GB capacity supports demanding multitasking workloads
- DDR3 1600 speed delivers 12800 MB/s bandwidth
- CL11 latency keeps response times low
- 35 V operation reduces power draw and heat
- 240-pin UDIMM fits standard desktop motherboards
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR3 Desktop PC Memory Solutions |
| Part Number | MD12800-828K1 |
| Capacity | 8GB |
| Type | 240-Pin DDR3 UDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Questions about this item
Will this 8GB DDR3 1600 module work in my Dell desktop that uses part number A7415827?
Yes, the module is listed as compatible with Dell A7415827 and matches the 240-pin UDIMM form factor used by those systems.
My motherboard only supports 1.35V low-voltage DDR3; is this stick safe to install?
The module operates at 1.35V, so it meets the low-voltage requirement and will not exceed the board's voltage limit.
Does the CL11 latency mean I need to change any BIOS settings for stable operation?
CL11 is the standard JEDEC timing for DDR3 1600; most boards will configure it automatically without manual adjustment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
$274.89
0.00354317BTC
In stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
$324.03
0.00417656BTC
In stock