We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for ASRock Rack W680D4ID-2T/G5/X550

SKU CH-AAJV-E1CTP

A 96 GB DDR5 kit of two 48 GB unbuffered UDIMMs running at 5600 MHz CL46 and 1.1 V, built for the ASRock Rack W680D4ID-2T/G5/X550

  • Capacity96GB (2 x 48GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB total capacity from two 48 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.10 V operating voltage reduces power draw
  • CL46 CAS latency for responsive data access
  • Validated for ASRock Rack W680D4ID-2T/G5/X550 motherboard

96GB DDR5 kit for ASRock Rack W680D4ID

This 96GB kit contains two 48GB DDR5 UDIMMs built for the ASRock Rack W680D4ID-2T/G5/X550 motherboard. It targets workstation and server builders who need maximum density on a consumer-form-factor board. Non-ECC unbuffered operation suits desktop-class platforms without registered-memory support. The modules install in standard 288-pin DDR5 slots.

5600 CL46 headroom at 1.1V

Rated at DDR5 5600 (PC5-44800) with CL46 latency, the kit runs at the JEDEC base voltage of 1.1V. Dual-rank 2Rx8 organisation on Samsung, Micron or Hynix die delivers the full 96GB across two slots. Headroom exists for multi-threaded workloads, virtualisation and large datasets. Systems requiring ECC correction or registered signalling cannot use this memory.

Two-slot layout frees remaining channels

The 2 x 48GB configuration occupies only two DIMM slots, leaving additional channels open for future expansion if the board provides more than two slots. No heat spreader is fitted, so clearance under large CPU coolers is not restricted. Builders needing ECC, registered DIMMs or speeds beyond the rated 5600 MT/s must select a different module type.

Highlights

  • 96 GB total capacity from two 48 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.10 V operating voltage reduces power draw
  • CL46 CAS latency for responsive data access
  • Validated for ASRock Rack W680D4ID-2T/G5/X550 motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K2
Capacity96GB (2 x 48GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Will the DDR5 5600 CL46 UDIMMs work with memory already installed in the ASRock Rack W680D4ID-2T/G5/X550?

The kit is validated for the ASRock Rack W680D4ID-2T/G5/X550; mixing with other modules is not tested and may prevent the system from training at 5600 MHz.

How can I confirm the kit is running at DDR5 5600 with CL46 timings after installation?

Enter the UEFI or use a tool such as CPU-Z to verify the memory frequency reads 5600 MT/s and the CAS latency shows 46.

What does the MD44800-4828K2 package contain and is anything else required?

The box includes two 48 GB 288-pin DDR5 UDIMM modules for a total of 96 GB; no additional parts are needed for installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.