We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board DDR5 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM memory upgrade

SKU CH-F1R8-45WM5

96GB DDR5 5600MHz ECC Registered RDIMM with CL46 latency and 1.1V operation, validated for Supermicro X14SDV-36C-SP3F motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

  • Full 96 GB capacity at rated 5600 MT/s speed
  • Registered ECC design prevents silent data corruption
  • Exact match for Supermicro X14SDV-36C-SP3F motherboard
  • 1 V operation reduces server power draw
  • 2Rx4 288-pin RDIMM fits required slot layout

Exact-match server upgrade

This 96GB DDR5 5600MHz CL46 registered ECC RDIMM is built as a direct upgrade for the Supermicro X14SDV-36C-SP3F motherboard. The 2Rx4 organisation, 1.1V operating voltage and 288-pin form factor match the board's memory-controller requirements so the full capacity is recognised at the rated speed.

Sustained-load behaviour

Registered architecture buffers the address and command signals, allowing every slot to remain fully populated without degrading signal integrity during continuous operation. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots under long-running workloads.

Pre-order checklist

Verify your system manual for supported capacities, approved DIMM population order and any BIOS version requirements before ordering. This module is a DDR5 RDIMM and will not fit UDIMM or SODIMM slots, nor will it work in systems that only accept unbuffered or non-ECC memory.

Highlights

  • Full 96 GB capacity at rated 5600 MT/s speed
  • Registered ECC design prevents silent data corruption
  • Exact match for Supermicro X14SDV-36C-SP3F motherboard
  • 1 V operation reduces server power draw
  • 2Rx4 288-pin RDIMM fits required slot layout

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does this 1.1V DDR5 RDIMM draw when the server runs continuously?

The module operates at 1.10V, the standard DDR5 voltage, so power draw per DIMM stays low even with all slots populated in a 24/7 workload.

What motherboard slot and memory controller features are required for this 288-pin registered ECC kit to function?

A DDR5-compatible RDIMM slot and a memory controller that supports registered ECC operation at 5600MHz are needed; the Supermicro X14SDV-36C-SP3F is the validated platform.

Can this 2Rx4 CL46 registered ECC module share channels with lower-density registered ECC DDR5 DIMMs already in the system?

Yes, provided the motherboard's population rules allow mixed capacities, the registered architecture and ECC function will operate correctly across all populated slots at the rated speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.