SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00498417BTC
In stock
NEMIX RAM
NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM Supermicro H13SST-G memory upgrade
A 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM validated for the Supermicro H13SST-G motherboard
- Capacity96GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB capacity lets you fully populate the Supermicro H13SST-G board
- DDR5 6400 speed with CL52 timing runs at the rated data rate
- Registered ECC design catches single-bit errors and keeps all slots stable
- 1 V operation matches the server's memory controller specification exactly
- 288-pin RDIMM form factor fits the motherboard's required slot type
96 GB DDR5 6400 ECC RDIMM for Supermicro H13SST-G
This 96 GB DDR5 6400 module is built for the Supermicro H13SST-G motherboard. It uses a 288-pin Registered DIMM form factor with ECC and a 2Rx4 rank structure. The 1.1 V operating voltage and CL52 latency match the board's memory controller expectations. It targets administrators who need full-capacity population on supported server platforms.
Replaces mismatched or lower-capacity DDR5 RDIMMs
Upgrading makes sense when existing modules run at a slower data rate, lack ECC, or use an unbuffered design the board cannot accept. The registered architecture offloads the memory controller so every slot can run fully populated at the rated 6400 MT/s speed. The jump is worth it when the system manual confirms this exact rank, voltage and timing combination for the target capacity.
Fits 288-pin RDIMM slots on the H13SST-G platform
The module requires a motherboard that accepts 288-pin DDR5 Registered ECC DIMMs and supports the stated population rules. It frees the builder from mixing incompatible ranks or voltages that cause boot failures or reduced performance. Consult the system manual for approved DIMM population order and maximum supported capacity per channel before installation.
Highlights
- 96 GB capacity lets you fully populate the Supermicro H13SST-G board
- DDR5 6400 speed with CL52 timing runs at the rated data rate
- Registered ECC design catches single-bit errors and keeps all slots stable
- 1 V operation matches the server's memory controller specification exactly
- 288-pin RDIMM form factor fits the motherboard's required slot type
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K1 |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does the 288-pin DDR5 RDIMM fit the Supermicro H13SST-G motherboard slots?
Yes, the 288-pin Registered DDR5 form factor matches the slots this motherboard requires; it is not a UDIMM or SODIMM.
What population order does the Supermicro H13SST-G manual specify for a 2Rx4 96GB kit?
Consult the motherboard manual for the approved DIMM population sequence, as server boards often require specific slot filling to run at 6400 speed.
Will the registered ECC modules need firmware updates or battery-backed cache maintenance later?
No firmware updates or cache batteries are involved; the DDR5 RDIMM operates at 1.10V with on-die ECC and requires only standard server cooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
