We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 192GB (6 x 32GB) 4800MHz CL40 1.1V ECC Registered RDIMM for Supermicro H14SSF

SKU CH-YCKB-P8NYN

A 192GB DDR5 registered ECC memory kit of six 32GB modules running at 4800MHz with CL40 latency and 1.1V for the Supermicro H14SSF motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 192 GB capacity across six 32 GB modules for dense server workloads
  • DDR5 4800 MHz speed with CL40 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H14SSF compatibility

192 GB DDR5 ECC RDIMM kit

This 192 GB kit contains six 32 GB DDR5 4800 MHz registered DIMMs with ECC and a CL40 latency at 1.1 V. It is built for the Supermicro H14SSF motherboard and matches the exact rank, voltage and timing that platform expects.

Registered buffering under full population

The registered architecture buffers every address and command line so the memory controller stays stable when all slots are occupied. ECC corrects single-bit errors on the fly, preventing silent data corruption during sustained workloads on the H14SSF platform.

DDR5 4800 PC5-38400 interface limits

The DDR5 4800 standard caps the data rate at 4800 MT/s and the peak bandwidth at PC5-38400 for this module. Installed memory cannot exceed the motherboard's qualified vendor list, maximum capacity per slot or population rules defined by Supermicro for the H14SSF.

Highlights

  • 192 GB capacity across six 32 GB modules for dense server workloads
  • DDR5 4800 MHz speed with CL40 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H14SSF compatibility

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power will the 1.1V DDR5-4800 CL40 kit draw when the server runs continuously?

Each module operates at 1.10V, the standard DDR5 voltage, so total power scales with the 192GB capacity and your CPU's memory-controller load rather than a fixed wattage figure.

What must the motherboard provide for these 288-pin registered ECC RDIMMs to function?

The board must support DDR5 RDIMMs, accept 2Rx8 registered ECC modules at 1.10V, and follow the Supermicro H14SSF population rules for all six slots.

Will the 2Rx8 registered ECC DDR5-4800 modules work in a system that only supports unbuffered DDR5 UDIMMs?

No, registered RDIMMs require a motherboard wired for registered memory; a UDIMM-only platform will not recognise or boot with this kit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.