NEMIX RAM
NEMIX RAM DDR5 256GB (2×128GB) 5600MHz ECC RDIMM 2Rx4 CL46 1.1V 288-pin Supermicro H13DSG-O-CPU memory upgrade
256 GB kit of two 128 GB DDR5 5600 MHz registered ECC RDIMMs at 1.1 V, CL46, 2Rx4, 288-pin, validated for Supermicro H13DSG-O-CPU
- Capacity256GB (2 x 128GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity from two 128 GB modules
- DDR5 5600 speed rated at PC5-44800 for rated throughput
- Registered ECC RDIMM corrects single-bit errors on the fly
- 2Rx4 dual-rank organisation matches the board's population rules
- 1 V standard voltage keeps power draw within spec
Exact-match upgrade for Supermicro H13DSG-O-CPU
This 256 GB kit delivers two 128 GB DDR5 registered ECC RDIMMs built to the precise rank, voltage and timing the server's memory controller expects. The modules are validated for full-capacity recognition and rated-speed operation on that specific motherboard.
Thermals noise and power draw in normal use
Registered buffering reduces electrical load on the memory controller, allowing all slots to run fully populated at 1.1 V without additional cooling requirements. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.
What the bundled accessories
The kit contains only the two 288-pin RDIMMs; no heat spreaders, software utilities or extra cables are included. Installation follows the motherboard manual's population rules, and lifetime replacement coverage with US-based technical support backs the hardware.
Highlights
- 256 GB total capacity from two 128 GB modules
- DDR5 5600 speed rated at PC5-44800 for rated throughput
- Registered ECC RDIMM corrects single-bit errors on the fly
- 2Rx4 dual-rank organisation matches the board's population rules
- 1 V standard voltage keeps power draw within spec
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How do I install the 2×128GB DDR5 5600MHz RDIMM kit into the Supermicro H13DSG-O-CPU and which slot order does the manual require?
Power down the server, open the chassis, and insert each 288-pin module into the DIMM slots specified by the motherboard manual for a two-DIMM population; the registered buffer and 1.1V operation mean the board must see the exact rank and voltage combination to train at 5600MT/s.
What maintenance or replacement will the 256GB DDR5 ECC RDIMM kit need over its service life?
The modules have no heat spreaders or moving parts, so routine maintenance is limited to keeping server airflow clean; ECC corrects single-bit errors automatically, but if a module develops uncorrectable errors the lifetime replacement warranty covers a swap.
What limit appears first when the 2Rx4 DDR5-5600 CL46 kit runs sustained workloads on the H13DSG-O-CPU?
The registered design offloads the memory controller, allowing full-speed operation at 5600MT/s with both slots populated; the first bound you hit will be the platform’s maximum supported capacity or thermal envelope, not the DIMM’s own timing or voltage ceiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
$104.99
0.0013299BTC
In stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
$7.99
0.00010121BTC
In stock