We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 4800 128GB (2×64GB) ECC Registered RDIMM 2Rx4 CL40 1.1V Supermicro H14SSL-N memory upgrade

SKU CH-HF50-H0KCZ

128 GB dual-rank ECC registered DDR5 kit tuned for the Supermicro H14SSL-N motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact-match 128 GB kit runs at DDR5-4800 CL40 1.1 V for full rated speed
  • 2Rx4 Registered ECC RDIMM offloads controller and corrects single-bit errors on the fly
  • Verified fit for Supermicro H14SSL-N 288-pin slots with correct rank and voltage
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade stability
  • Lifetime replacement warranty with free US-based technical support

Exact DDR5-4800 ECC RDIMM kit for Supermicro

This 128 GB kit contains two 64 GB registered DIMMs built to the DDR5-4800 standard with CL40 timing and 1.1 V operation. It is designed for servers that require ECC Registered memory in a 288-pin form factor.

Registered 2Rx4 architecture matches the board's

The modules use a 2Rx4 organisation and registered buffering so the memory controller can address every slot at full rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption.

288-pin RDIMMs install like standard server DIMMs

Align the key notch with the slot and press until the latches engage; no heat spreader is fitted so clearance is generous. Verify the motherboard manual for approved population order and maximum supported capacity before fitting.

Highlights

  • Exact-match 128 GB kit runs at DDR5-4800 CL40 1.1 V for full rated speed
  • 2Rx4 Registered ECC RDIMM offloads controller and corrects single-bit errors on the fly
  • Verified fit for Supermicro H14SSL-N 288-pin slots with correct rank and voltage
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade stability
  • Lifetime replacement warranty with free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the DDR5-4800 speed rating mean when the modules are installed in a Supermicro H14SSL-N?

The memory controller will initialise each 64 GB RDIMM at 4800 MT/s with CL40 timings and 1.1 V, so the kit runs at its rated data rate across both channels.

How does the 288-pin registered ECC interface affect usable bandwidth and error handling?

Registered buffering reduces electrical load on the memory controller, allowing full-speed operation with both slots populated, while on-die ECC corrects single-bit errors before they reach the OS.

What physical clearance and slot requirements must the H14SSL-N meet for this 2Rx4 kit?

The board needs two adjacent 288-pin DDR5 RDIMM slots with enough height clearance for modules without heat spreaders, and the population order must follow the manual's 2Rx4 guidelines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.