We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 96GB 6x16GB CL40 1.1V ECC RDIMM Supermicro H14SSL-N memory upgrade

SKU CH-C1Q3-ZD35N

96 GB registered ECC DDR5 kit in six 16 GB modules running at 4800 MT/s, CL40, 1.1 V, validated for the Supermicro H14SSL-N motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Show 24 more configurations
  • 96 GB total capacity from six 16 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC registered design corrects single-bit errors automatically
  • 288-pin RDIMM form factor matches Supermicro H14SSL-N slots
  • Major OEM DRAM chips from Samsung, Micron or Hynix

Exact-match 96 GB DDR5-4800 kit for Supermicro

This 96 GB kit contains six 16 GB DDR5-4800 RDIMMs rated at PC5-38400 with CL40 latency and 1.1 V operation. Registered ECC design with 1Rx8 organisation ensures full-capacity recognition and single-bit error correction for production workloads.

Pre-installation checklist for the H14SSL-N

Verify the motherboard manual for approved DIMM population order, maximum supported capacity per channel, and any BIOS version requirements before ordering. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit the server board.

Build integration and slot utilisation

Six modules occupy six RDIMM slots on the Supermicro H14SSL-N, leaving remaining slots free for future expansion within the board's population rules. Registered buffering reduces electrical load on the memory controller so every populated slot runs at the rated 4800 MT/s without downclocking.

Highlights

  • 96 GB total capacity from six 16 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC registered design corrects single-bit errors automatically
  • 288-pin RDIMM form factor matches Supermicro H14SSL-N slots
  • Major OEM DRAM chips from Samsung, Micron or Hynix

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the NEMIX RAM 96GB DDR5-4800 kit and do I need anything else?

The kit contains six 16GB DDR5 288-pin RDIMM modules totalling 96GB. No extra components are required for installation in a compatible Supermicro H14SSL-N system.

Should I choose this 6x16GB CL40 kit or a different capacity for my H14SSL-N?

Select this 6x16GB kit when your board's memory population rules call for six identical 1Rx8 Registered ECC DIMMs at 1.1V; other capacities or ranks may not match the approved configuration.

What does the DDR5-4800 CL40 rating mean once the modules are installed in the server?

The memory will run at 4800 MT/s with a CAS latency of 40 cycles at 1.1V, delivering the exact speed and timing the H14SSL-N memory controller expects for full-capacity operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.