We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 1.1TB 12x96GB CL40 1.1V 2Rx4 Supermicro H13SSL-NT memory upgrade

SKU CH-PTG1-7RYRA

A 1.1 TB DDR5-4800 registered ECC kit with twelve 96 GB modules at 1.10 V CL40, built for the Supermicro H13SSL-NT motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Show 24 more configurations
  • 1 TB total capacity across 12 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V standard voltage
  • Registered ECC RDIMM design for full-slot stability and error correction
  • 2Rx4 dual-rank organisation matches controller expectations exactly
  • Verified fitment for Supermicro H13SSL-NT motherboard 288-pin slots

Server Memory Kit for Supermicro H13SSL-NT

This 1.1TB kit contains twelve 96GB DDR5 4800 RDIMM modules built to the exact rank, voltage and timing the Supermicro H13SSL-NT memory controller expects. Registered ECC architecture with 2Rx4 organisation allows every slot to run fully populated at rated speed while correcting single-bit errors on the fly.

Sustained Load Behaviour

Registered buffering offloads the memory controller so all twelve slots operate at full capacity without signal degradation during continuous workloads. ECC detection and correction runs on every cycle preventing silent data corruption and unplanned reboots from reaching production environments.

Pre-Installation Checks

Verify your motherboard manual for supported capacities, approved DIMM population order and any BIOS version requirements before ordering. This kit uses 288-pin DDR5 RDIMM form factor and will not fit UDIMM or SODIMM slots or boards wired for earlier DDR generations.

Highlights

  • 1 TB total capacity across 12 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V standard voltage
  • Registered ECC RDIMM design for full-slot stability and error correction
  • 2Rx4 dual-rank organisation matches controller expectations exactly
  • Verified fitment for Supermicro H13SSL-NT motherboard 288-pin slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.1TB kit draw at its 1.10V operating voltage?

The kit runs at the standard DDR5 1.10V; total power scales with the 12 modules but stays within the platform's registered DIMM power envelope.

What motherboard slot count and DIMM type are required to install all 12 modules?

You need a Supermicro H13SSL-NT with 12 free 288-pin DDR5 RDIMM slots and a CPU that supports 2Rx4 registered ECC population rules.

Will these CL40 4800 MT/s modules downclock reliably if the board only supports lower speeds?

DDR5 RDIMMs negotiate speed with the memory controller; the kit will operate at the highest common speed the platform allows.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.