We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 384GB 4x96GB CL40 1.1V Supermicro H14SHM memory upgrade

SKU CH-TB4P-RXVJP

384 GB DDR5 ECC registered memory kit with four 96 GB modules at 4800 MHz, CL40, 1.1 V, 288-pin for Supermicro H14SHM

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Show 24 more configurations
  • 384 GB total capacity from four 96 GB modules
  • DDR5-4800 speed with CL40 latency at 1.1 V
  • Registered ECC design corrects single-bit errors automatically
  • 288-pin RDIMM form factor built for Supermicro H14SHM
  • 2Rx4 rank organisation enables full population at rated speed

Exact-fit DDR5 server kit

This 384 GB kit contains four 96 GB DDR5-4800 RDIMMs built to the precise rank, voltage and timing the Supermicro H14SHM motherboard expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly.

Suited for maxed-out H14SHM builds

Ideal for administrators who need the full 384 GB capacity this board supports with 2Rx4 registered modules at 1.1 V. Not for systems that require UDIMM or SODIMM form factors, non-ECC memory, or lower-density DIMMs that leave slots empty.

Drops straight into the H14SHM

The 288-pin RDIMM form factor matches the board's memory slots exactly, so no adapters or BIOS workarounds are needed. Populating all four channels frees the memory controller from rank-mixing constraints and delivers the full bandwidth the platform provides.

Highlights

  • 384 GB total capacity from four 96 GB modules
  • DDR5-4800 speed with CL40 latency at 1.1 V
  • Registered ECC design corrects single-bit errors automatically
  • 288-pin RDIMM form factor built for Supermicro H14SHM
  • 2Rx4 rank organisation enables full population at rated speed

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do I need a Supermicro H14SHM motherboard with 288-pin DDR5 RDIMM slots to install this 384GB kit?

Yes, this kit is built for the Supermicro H14SHM motherboard and requires its 288-pin DDR5 RDIMM slots; the registered ECC modules will not fit UDIMM or SODIMM sockets.

Can I mix these 96GB 2Rx4 modules with smaller DDR5 RDIMMs already in the H14SHM?

The H14SHM's memory-population rules determine mixed-capacity support; consult the board manual for approved DIMM order and maximum ranks per channel before adding these 4x96GB sticks.

How can I confirm the kit is running at DDR5-4800 CL40 1.1V after installation?

Enter the BIOS or use a hardware-inventory tool to verify each module reports 4800 MT/s, CL40 latency, 1.10 V, registered ECC status, and the full 384 GB capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.