We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 512GB 8x64GB 6400MHz CL52 1.1V ECC RDIMM Supermicro H14SHM

SKU CH-TETY-T7X6S

Eight-module kit provides 512GB of registered DDR5 ECC memory at 6400MHz CL52 for Supermicro H14SHM servers

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity from eight 64 GB modules
  • DDR5 6400 MT/s speed with CL52 latency
  • Registered ECC architecture prevents silent data corruption
  • 1 V operation matches server memory controller spec
  • Verified fitment for Supermicro H14SHM motherboard

Exact-match DDR5 server upgrade

This 512GB kit contains eight 64GB DDR5-6400 registered ECC RDIMMs built to the precise rank, voltage, and timing the Supermicro H14SHM memory controller expects. The modules run at 1.1V with CL52 latency and a 2Rx4 organisation so every slot can be populated at full rated speed. The 288-pin registered form factor matches the board's physical and electrical requirements exactly.

Built for fully populated H14SHM configurations

This kit suits administrators who need to fill all eight channels with validated registered ECC memory for maximum capacity and error correction. It is not intended for workstations or consumer boards that accept only unbuffered UDIMMs, nor for systems limited to lower densities or slower DDR5 data rates. Buyers requiring SODIMM or non-ECC modules should look elsewhere.

2Rx4 registered ECC at 1.1V

The 2Rx4 registered ECC architecture at 1.1V is the single specification that determines whether this kit will initialise at full capacity on the H14SHM. If the platform's qualified-vendor list calls for a different rank structure, voltage, or buffering type, the modules will not operate as rated.

Highlights

  • 512 GB total capacity from eight 64 GB modules
  • DDR5 6400 MT/s speed with CL52 latency
  • Registered ECC architecture prevents silent data corruption
  • 1 V operation matches server memory controller spec
  • Verified fitment for Supermicro H14SHM motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

What does the 6400MHz speed mean once installed in a Supermicro H14SHM?

The kit runs at DDR5-6400 (PC5-51200) with CL52 latency at 1.1V, so the memory controller can recognise all 512GB and operate every slot at the rated frequency.

What does the 288-pin RDIMM interface cap in practice?

The 288-pin Registered DIMM form factor is required by the H14SHM; it supports ECC and registered buffering for full-capacity population across all channels.

What physical space and power does the 8-module kit need to fit?

Eight 288-pin RDIMM slots, 1.10V supply, and no heat spreaders, so standard server DIMM clearance applies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.