NEMIX RAM
NEMIX RAM DDR5 5600 64GB (4x16GB) CL46 1.1V ECC RDIMM Supermicro H14SST-G memory upgrade
A 64 GB DDR5 ECC registered RDIMM kit of four 16 GB modules running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro H14SST-G motherboard
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 64 GB kit (4 × 16 GB) fills every slot at rated DDR5-5600 speed
- CL46 latency and 1.1 V keep the memory controller within spec for reliable operation
- Registered ECC RDIMM design corrects single-bit errors and supports full-capacity population
- 288-pin DDR5 form factor matches the Supermicro H14SST-G motherboard exactly
- Built with major-brand Samsung, Micron or Hynix chips for enterprise-grade stability
Exact-fit DDR5 upgrade for Supermicro H14SST-G
This 64GB kit contains four 16GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the motherboard expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. Modules arrive as a matched set so the server recognises full capacity immediately.
288-pin registered form factor with no heat spreader
The RDIMM design offloads the memory controller for stable operation across all populated slots. Absence of a heat spreader keeps module height low for dense chassis airflow and simplifies visual inspection during maintenance. Each DIMM uses 1Rx8 organisation and major OEM chips from Samsung, Micron or Hynix.
Low-voltage DDR5 at 1.1V for efficient server
Operating at 1.10V reduces power draw per module while maintaining CL46 latency at 5600 MT/s. Registered buffering and ECC together prevent silent data corruption and unplanned reboots under sustained workloads. Verify population order in the motherboard manual before installation.
Highlights
- 64 GB kit (4 × 16 GB) fills every slot at rated DDR5-5600 speed
- CL46 latency and 1.1 V keep the memory controller within spec for reliable operation
- Registered ECC RDIMM design corrects single-bit errors and supports full-capacity population
- 288-pin DDR5 form factor matches the Supermicro H14SST-G motherboard exactly
- Built with major-brand Samsung, Micron or Hynix chips for enterprise-grade stability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does the DDR5-5600 interface cap the kit at 5600 MT/s on the Supermicro H14SST-G?
Yes, the kit runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, matching the board's rated speed for this configuration.
What physical slot and form factor does this 288-pin RDIMM kit require on the H14SST-G?
Four 288-pin DDR5 RDIMM slots; the modules are registered ECC 1Rx8 with no heat spreader, so they fit standard server DIMM sockets.
What population order should I follow when installing all four 16 GB modules?
Consult the Supermicro H14SST-G manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots fill first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
$104.99
0.0013383BTC
In stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
$7.99
0.00010185BTC
In stock