SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00495895BTC
In stock
NEMIX RAM
NEMIX RAM DDR5 5600 768GB (16 x 48GB) ECC Registered RDIMM CL46 1.1V 288-pin Supermicro H13SSH
A 768 GB DDR5 5600 ECC Registered RDIMM kit of sixteen 48 GB modules at CL46 and 1.1 V, validated for the Supermicro H13SSH motherboard
- Capacity768GB (16 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 768 GB total capacity from sixteen 48 GB modules for maximum server density
- DDR5-5600 speed with CL46 latency delivers rated throughput out of the box
- Registered ECC architecture offloads the controller and corrects single-bit errors automatically
- 10 V operation reduces power draw across all populated DIMM slots
- Verified 288-pin RDIMM fitment for Supermicro H13SSH motherboard memory population rules
Exact-fit 768 GB DDR5 kit
This NEMIX RAM kit supplies 768 GB of DDR5 memory as sixteen 48 GB registered ECC RDIMMs. It is built for the Supermicro H13SSH motherboard and runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V. The registered design lets the memory controller manage every slot at full population.
Suited for full-population server builds
This kit suits administrators who need the exact 16-module configuration the H13SSH requires for maximum capacity with registered ECC stability. It is not for systems that accept only unbuffered UDIMMs or SODIMMs. It is also not for boards that limit total capacity below 768 GB or that require a different rank structure.
Registered ECC RDIMM form factor
The modules are 288-pin DDR5 RDIMMs with a 2Rx8 organization and on-die ECC. Registered buffering offloads the memory controller so all sixteen slots operate at the rated 5600 MT/s. Verify your motherboard manual for approved population order before installation.
Highlights
- 768 GB total capacity from sixteen 48 GB modules for maximum server density
- DDR5-5600 speed with CL46 latency delivers rated throughput out of the box
- Registered ECC architecture offloads the controller and corrects single-bit errors automatically
- 10 V operation reduces power draw across all populated DIMM slots
- Verified 288-pin RDIMM fitment for Supermicro H13SSH motherboard memory population rules
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K16 |
| Capacity | 768GB (16 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 16X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Should I choose the 16-module kit or a smaller capacity for my Supermicro H13SSH?
The 768GB kit fills all 16 slots with 48GB modules, giving maximum capacity and full-speed operation on the H13SSH. Smaller kits leave slots empty and reduce total memory.
What does the DDR5 5600 speed rating deliver once installed in the H13SSH?
The modules run at 5600 MT/s with CL46 latency at 1.1V, providing the rated bandwidth the motherboard's memory controller expects when fully populated.
How does the 288-pin RDIMM interface affect performance on this board?
The registered 288-pin RDIMM design buffers address and command signals, allowing all 16 slots to run at 5600 MT/s without signal degradation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
