NEMIX RAM
NEMIX RAM DDR5-6400 192GB 12x16GB CL52 1.1V ECC RDIMM Supermicro H13DSG-OM memory upgrade
192GB DDR5-6400 ECC registered RDIMM kit with twelve 16GB modules at CL52 and 1.1V for Supermicro H13DSG-OM
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from twelve 16 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency runs at rated frequency on the H13DSG-OM
- 1 V registered ECC RDIMM architecture reduces controller load and corrects single-bit errors
- 1Rx8 rank organisation matches the motherboard's population rules for full-slot operation
- 288-pin DDR5 RDIMM form factor fits the Supermicro board's memory slots exactly
Exact-match DDR5 server upgrade
This NEMIX RAM kit delivers 192 GB across twelve 16 GB DDR5 RDIMMs built for the Supermicro H13DSG-OM motherboard. Registered ECC modules operate at 1.1 V with CL52 latency. The 1Rx8 rank configuration matches the board's memory controller requirements for full-capacity recognition.
288-pin RDIMM form factor
Only 288-pin Registered DIMMs fit this platform; UDIMM or SODIMM modules will not install or function. The kit supplies twelve sticks to populate every available slot. Verify the motherboard manual for approved population order before installation.
Low-voltage registered operation
Running at 1.1 V reduces power draw per module while the registered buffer lightens the memory controller load across a fully populated chassis. ECC corrects single-bit errors on the fly to prevent silent data corruption. No heat spreaders are fitted, so airflow must follow the server vendor's cooling guidelines.
Highlights
- 192 GB total capacity from twelve 16 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency runs at rated frequency on the H13DSG-OM
- 1 V registered ECC RDIMM architecture reduces controller load and corrects single-bit errors
- 1Rx8 rank organisation matches the motherboard's population rules for full-slot operation
- 288-pin DDR5 RDIMM form factor fits the Supermicro board's memory slots exactly
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
What does the 6400 MT/s rating mean once these modules are installed in a Supermicro H13DSG-OM server?
The kit runs at DDR5-6400 (PC5-51200) with CL52 latency at 1.1 V, so the memory controller can operate all twelve slots at the rated speed without down-clocking.
How does the 288-pin RDIMM interface and registered design affect what the motherboard can accept?
The board requires 288-pin registered DDR5 RDIMMs; this kit matches that exact form factor and electrical loading, allowing full 12-slot population at 192 GB total capacity.
What physical clearance and slot population rules apply when fitting all twelve 16 GB modules?
Each module is a standard-height 288-pin RDIMM with no heat spreader; consult the H13DSG-OM manual for the approved DIMM installation sequence across the twelve slots.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



