SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00498233BTC
In stock
NEMIX RAM
NEMIX RAM DDR5 6400 192GB (4x48GB) CL52 2Rx8 1.1V ECC RDIMM Supermicro H13DSH
192 GB registered ECC DDR5 kit with four 48 GB modules running at 6400 MT/s, CL52, 1.1 V for Supermicro H13DSH servers
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from four 48 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches server memory controller requirements
- 288-pin RDIMM form factor built for Supermicro H13DSH motherboard
Capacity and fit
This 192GB kit (4 x 48GB) DDR5 6400 PC5-51200 CL52 1.1V 288-pin ECC Registered RDIMM is built for the Supermicro H13DSH motherboard. The 2Rx8 rank structure and registered design match the board's memory controller so the full capacity is recognised at rated speed. It targets server administrators who need maximum registered ECC capacity on this specific platform.
Before ordering
Confirm the H13DSH manual for approved DIMM population order, maximum capacity per slot and any BIOS version requirements. The motherboard requires 288-pin RDIMM modules; UDIMM or SODIMM will not fit or function. Verify that your configuration supports four 48GB 2Rx8 registered DIMMs at 1.1V before purchase.
Thermals and power
Modules operate at 1.1V without heat spreaders, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all four slots are populated. Power draw scales with the 192GB capacity and 6400 speed; ensure server cooling is adequate for fully populated memory channels under sustained workloads.
Highlights
- 192 GB total capacity from four 48 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches server memory controller requirements
- 288-pin RDIMM form factor built for Supermicro H13DSH motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
What is included in the NEMIX RAM DDR5 6400 192GB kit and do I need to buy anything else for installation?
The kit contains four 48GB DDR5 6400 ECC Registered RDIMMs for a total of 192GB. No additional parts are required; the modules install directly into the Supermicro H13DSH motherboard's 288-pin slots.
Should I choose this 192GB (4x48GB) CL52 kit or a different capacity for my Supermicro H13DSH?
This 192GB kit uses four 48GB 2Rx8 modules at CL52 and 1.1V, matching the board's validated population rules. Select it when your workload needs the full 192GB capacity; otherwise choose a smaller validated kit.
What does the DDR5 6400 (PC5-51200) rating mean once the modules are running in the H13DSH?
The modules operate at 6400 MT/s with CL52 latency at 1.1V, delivering the rated bandwidth and error-correcting stability the server's memory controller expects when fully populated.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
