SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.004997BTC
In stock
NEMIX RAM
NEMIX RAM DDR5 6400 192GB 6x32GB ECC RDIMM CL52 1.1V Supermicro H13DSH
A 192 GB DDR5 registered ECC kit of six 32 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H13DSH motherboard
- Capacity192GB (6 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192GB capacity across six 32GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency matches rated platform timing
- Registered ECC architecture corrects single-bit errors and stabilises full-slot population
- 1V operation meets the Supermicro H13DSH memory controller specification
- 288-pin RDIMM form factor fits the board's required DIMM slot type
192GB DDR5 ECC RDIMM Kit
This 192GB kit contains six 32GB DDR5 6400MHz registered DIMMs built for the Supermicro H13DSH motherboard. Each module runs at 1.1V with CL52 latency and uses a 2Rx8 organisation. The registered design lets the memory controller drive a fully populated array at rated speed.
DDR5 6400 Registered Limits
DDR5 6400 sets the maximum data rate the memory controller can sustain across all six slots. Registered buffering reduces electrical load so every slot stays stable at full capacity. Population rules in the H13DSH manual decide which slots must be filled first and whether mixed ranks are allowed.
Capacity and Headroom
Six 32GB modules deliver 192GB of ECC protected memory for virtualisation, databases or large dataset work. The 2Rx8 rank structure and 1.1V operation keep power draw predictable under sustained load. Workloads that exceed 192GB or need higher frequencies than 6400MT/s will require a different platform.
Highlights
- 192GB capacity across six 32GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency matches rated platform timing
- Registered ECC architecture corrects single-bit errors and stabilises full-slot population
- 1V operation meets the Supermicro H13DSH memory controller specification
- 288-pin RDIMM form factor fits the board's required DIMM slot type
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K6 |
| Capacity | 192GB (6 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 6X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Should I choose the 192GB kit with six 32GB modules or a different capacity for my Supermicro H13DSH?
The 192GB kit provides six 32GB DDR5 6400 RDIMMs. This matches the board's 288-pin registered DIMM requirement and 2Rx8 rank structure for full-capacity recognition across all populated slots.
What does the DDR5 6400 speed rating deliver once installed in the H13DSH?
The modules run at 6400 MT/s (PC5-51200) with CL52 latency at 1.1V. Registered ECC architecture lets every slot operate at this rated speed while correcting single-bit errors to prevent silent data corruption.
How does the 288-pin RDIMM interface and ECC registration affect real-world limits?
The 288-pin registered form factor is mandatory for the H13DSH; UDIMMs or SODIMMs will not fit. Registration buffers the memory controller so all six slots run fully populated at 192GB total capacity with ECC active.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
