NEMIX RAM
NEMIX RAM DDR5 6400 384GB (8x48GB) CL52 1.1V 2Rx8 ECC RDIMM Supermicro H14DSG-OM memory upgrade
Eight 48 GB DDR5 RDIMMs deliver 384 GB of registered ECC memory at 6400 MT/s CL52 for the Supermicro H14DSG-OM
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from eight 48 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM prevents data corruption under load
- 2Rx8 dual-rank organisation fully populates every slot
- Exact-match kit validated for Supermicro H14DSG-OM motherboard
Exact-match DDR5 upgrade
This 384GB kit delivers eight 48GB DDR5 6400 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It installs as a matched set so the server recognises the full capacity and runs at the rated PC5-51200 speed.
Registered ECC architecture
The 288-pin RDIMM form factor and 2Rx8 organisation offload the controller, allowing every slot to be populated at 1.10V without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.
384GB capacity ceiling
Eight modules fill the board's supported DIMM population for maximum density at DDR5-6400 CL52. Builds requiring more memory than this kit provides must use a different platform, as the installed modules already occupy the full slot count.
Highlights
- 384 GB total capacity from eight 48 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM prevents data corruption under load
- 2Rx8 dual-rank organisation fully populates every slot
- Exact-match kit validated for Supermicro H14DSG-OM motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How does the 1.10 V operating voltage limit headroom during sustained heavy workloads?
The modules run at the standard DDR5 server voltage of 1.10 V; this is the voltage the memory controller expects for stable full-speed operation across all eight slots.
What thermal or acoustic impact should I expect when all eight RDIMMs are fully populated and running continuously?
The kit has no heat spreaders; registered DDR5 RDIMMs rely on chassis airflow, so ensure your server fans provide adequate cooling across the 288-pin DIMM slots for continuous duty.
Which motherboard features must my system already provide for this 384 GB kit to function?
Your Supermicro H14DSG-OM motherboard must support 288-pin DDR5 RDIMM slots, registered ECC memory, 2Rx8 organization, and a population rule that allows eight 48 GB modules at DDR5-6400.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



