SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00498937BTC
In stock
NEMIX RAM
NEMIX RAM DDR5-6400 ECC RDIMM 128GB 2x64GB CL52 1.1V Supermicro H13DSG-OM memory upgrade
128GB dual-channel kit of DDR5-6400 registered ECC RDIMMs at 1.1V CL52, validated for the Supermicro H13DSG-OM motherboard
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 match for Supermicro H13DSG-OM runs at full rated speed
- 128 GB 2Rx4 RDIMM kit fills two slots with registered ECC stability
- 1 V CL52 timing recognised by the memory controller without manual tuning
- Registered architecture offloads the controller for full-capacity operation across all slots
- ECC corrects single-bit errors on the fly preventing silent data corruption
Exact-match DDR5-6400 ECC RDIMM kit for Supermicro
This 128GB kit contains two 64GB DDR5-6400 registered ECC RDIMMs built to the exact rank, voltage, and timing the Supermicro H13DSG-OM memory controller expects. It installs as a matched pair so the server recognises the full capacity and runs at the rated 6400 MT/s speed without manual tuning.
DDR5-6400 Registered ECC limits
The modules operate at 1.1V with CL52 latency in a 2Rx4 organisation, which the board's memory controller must support natively. Registered buffering allows every slot to be populated at full capacity, while on-die ECC corrects single-bit errors in flight. The 288-pin RDIMM form factor is physically incompatible with UDIMM or SODIMM slots, so the motherboard must provide registered DDR5 DIMM sockets.
Verify your Supermicro H13DSG-OM configuration
Consult the motherboard manual for the approved DIMM population order, maximum supported capacity per socket, and any BIOS version requirements before ordering. Server memory validation lists vary by specific model and firmware revision, so only the vendor's qualified-vendor list confirms that this exact 2Rx4 64GB RDIMM part number will initialise at 6400 MT/s in your chassis.
Highlights
- Exact DDR5-6400 match for Supermicro H13DSG-OM runs at full rated speed
- 128 GB 2Rx4 RDIMM kit fills two slots with registered ECC stability
- 1 V CL52 timing recognised by the memory controller without manual tuning
- Registered architecture offloads the controller for full-capacity operation across all slots
- ECC corrects single-bit errors on the fly preventing silent data corruption
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Should I pick the 2x64GB kit or look for a different capacity for my Supermicro H13DSG-OM?
The kit supplies 128GB total as two 64GB modules. The H13DSG-OM requires registered ECC RDIMMs, and this exact 2Rx4 configuration matches the board's population rules for full-capacity operation.
What does DDR5-6400 actually deliver once the modules are installed in the server?
The memory controller will run the kit at 6400 MT/s (PC5-51200) with CL52 latency at 1.1V, giving the rated bandwidth and error-correcting stability the platform expects.
Is the 288-pin RDIMM interface the right one for the H13DSG-OM, and what does it cap?
Yes. The board only accepts 288-pin registered DDR5 RDIMMs; the registered buffer lets every slot run fully populated at the full 128GB kit capacity without signal degradation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
