NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 192GB 12x16GB 1Rx8 CL52 1.1V Supermicro H14SHM memory upgrade
192 GB DDR5-6400 ECC registered RDIMM kit in twelve 16 GB modules, CL52 at 1.1 V, validated for Supermicro H14SHM
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB capacity across 12 modules of 16 GB each
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC architecture for error correction and signal integrity
- Exact-fit 288-pin RDIMM kit validated for Supermicro H14SHM
- Built with major OEM chips from Samsung, Micron or Hynix
192GB DDR5 ECC RDIMM Kit for Supermicro H14SHM
This 192GB kit contains twelve 16GB DDR5 6400 Registered ECC RDIMMs built for the Supermicro H14SHM motherboard. The modules run at 1.1V with CL52 latency and a 1Rx8 rank structure that matches the board's memory controller requirements. IT administrators upgrading compatible Supermicro servers can populate every slot with confidence.
Registered ECC Architecture
The Registered design buffers address and command signals, reducing electrical load on the memory controller when all twelve slots are occupied. ECC circuitry detects and corrects single-bit errors automatically, protecting data integrity in production workloads. Operating at 1.1V, the modules draw minimal power while maintaining DDR5 6400 speeds across the full 192GB capacity.
Supermicro H14SHM Motherboard Compatibility Required
This kit is validated specifically for the Supermicro H14SHM motherboard and its 288-pin RDIMM slots. It will not function in systems that require UDIMM or SODIMM form factors, nor in boards that do not support Registered ECC DDR5 memory. Consult the motherboard manual for approved population order and maximum supported capacity before installation.
Highlights
- 192 GB capacity across 12 modules of 16 GB each
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC architecture for error correction and signal integrity
- Exact-fit 288-pin RDIMM kit validated for Supermicro H14SHM
- Built with major OEM chips from Samsung, Micron or Hynix
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How do I install the 12 RDIMM modules in the Supermicro H14SHM, and which population step is most often missed?
The board requires 288-pin RDIMMs in the exact order shown in its manual; the step most often missed is following the prescribed slot sequence for all 12 modules so the controller recognises the full 192 GB at DDR5-6400.
What maintenance or replacement will the 1Rx8 ECC RDIMM kit need over its service life?
No scheduled maintenance is required; the modules carry a lifetime replacement warranty, so any defective 16 GB stick is swapped without further action on your part.
What limit appears first when the 192 GB kit runs sustained workloads at CL52 1.1 V?
The registered buffer and on-die ECC keep signal integrity at the rated DDR5-6400 speed, so the first practical ceiling is the motherboard's maximum supported capacity rather than the memory itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



