NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 192GB 12x16GB CL52 1.1V Supermicro H14DSG-OM
192GB kit of twelve 16GB DDR5-6400 ECC registered DIMMs at CL52 and 1.1V for Supermicro H14DSG-OM motherboards
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from twelve 16 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors automatically
- 1 V operation matches the server memory controller specification
- Verified compatible with Supermicro H14DSG-OM motherboard
192GB DDR5-6400 ECC RDIMM kit for Supermicro
This 192GB kit contains twelve 16GB DDR5-6400 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. The 1Rx8 registered design allows every slot to be fully populated at the rated 6400 MT/s speed while ECC corrects single-bit errors on the fly.
Check motherboard manual for population rules
Before ordering, consult the Supermicro H14DSG-OM manual for supported DIMM capacities, approved population order and installation steps. The board requires 288-pin registered RDIMMs — not UDIMMs or SODIMMs — and memory support varies by specific server configuration, so verification prevents mismatched modules.
Registered ECC design runs at 1.1V
The modules operate at the standard 1.1V DDR5 voltage and use a registered architecture that reduces electrical load on the memory controller when all twelve slots are filled. No heat spreaders are fitted, so airflow across the DIMM rows in the server chassis handles thermal management during normal operation.
Highlights
- 192 GB total capacity from twelve 16 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors automatically
- 1 V operation matches the server memory controller specification
- Verified compatible with Supermicro H14DSG-OM motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does the 192GB kit ship as twelve individual 16GB modules or do I need to buy extra DIMMs?
The kit contains twelve 16GB DDR5 RDIMM modules, giving the full 192GB capacity in one package — no additional DIMMs are required.
Should I choose a different capacity or rank for the Supermicro H14DSG-OM, or is the 12×16GB 1Rx8 kit the right match?
This 12×16GB 1Rx8 Registered ECC kit is spec-matched to the Supermicro H14DSG-OM motherboard and meets its population rules for full-capacity operation.
Will the CL52 latency and 6400 MT/s speed actually run at those ratings once installed in the server?
Yes — the modules are built to the exact rank, voltage and timing the board's memory controller expects, so they are recognised at full capacity and operate at the rated DDR5-6400 CL52 speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



