We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 6400 ECC Registered RDIMM 96GB (6 x 16GB) CL52 1.1V 288-pin memory upgrade

SKU CH-TH0Z-4D6MB

Six 16 GB DDR5 RDIMMs deliver 96 GB of registered ECC memory at 6400 MT/s and CL52 for the Supermicro H14SHM motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Full 96 GB capacity runs at rated DDR5 6400 speed
  • Registered ECC design prevents silent data corruption
  • 1 V operation lowers server power draw
  • Six 16 GB 1Rx8 modules fill every slot
  • Verified fit for Supermicro H14SHM motherboard

96GB DDR5 ECC RDIMM Kit

This 96GB kit contains six 16GB DDR5 6400 registered ECC modules built for Supermicro H14SHM motherboards. Each RDIMM runs at 1.1V with CL52 latency and a 1Rx8 organisation. The registered design lets the memory controller address every slot at full capacity.

For Servers Needing Verified Population

System administrators who must populate all slots with a single qualified part number will find this kit matches the board's exact rank, voltage and timing requirements. Builders using consumer boards, laptops or any platform that accepts only unbuffered UDIMMs cannot use these registered modules.

Capacity and Headroom

The 96GB total provides ample space for virtualisation hosts, database buffers and multi-tenant workloads that benefit from ECC protection. Workloads that exceed 96GB or require higher frequencies than 6400MT/s will need a different configuration or a motherboard that supports larger registered DIMMs.

Highlights

  • Full 96 GB capacity runs at rated DDR5 6400 speed
  • Registered ECC design prevents silent data corruption
  • 1 V operation lowers server power draw
  • Six 16 GB 1Rx8 modules fill every slot
  • Verified fit for Supermicro H14SHM motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Does this 96GB DDR5 6400 kit require a Supermicro H14SHM motherboard with 288-pin RDIMM slots to work?

Yes, this kit is built for the Supermicro H14SHM motherboard and needs its 288-pin DDR5 RDIMM slots; the modules will not fit UDIMM or SODIMM sockets.

If I keep older DDR5 modules rated at a different speed or voltage, will this 1.1V CL52 1Rx8 kit run alongside them?

Mixing ranks, voltages or timings can prevent the memory controller from training all slots at 6400 MT/s; the board will typically drop to the slowest common settings or fail to post.

After installing all six 16GB modules, how can I confirm the server sees the full 96GB at DDR5 6400 with ECC active?

Check the BIOS memory information screen: it should report 96GB total, 6400 MT/s (PC5-51200), CL52, 1.1V and show ECC enabled for each populated slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.