NEMIX RAM
NEMIX RAM DDR5 64GB (2x32GB) 6400 CL52 1.1V ECC RDIMM Supermicro H13SRH memory upgrade
A 64GB DDR5 ECC Registered RDIMM kit (2x32GB) running at 6400MHz CL52 1.1V, validated for Supermicro H13SRH servers
- Capacity64GB (2 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match 64 GB kit runs at DDR5-6400 CL52 1.1 V for full-rated speed
- Registered ECC RDIMM corrects single-bit errors preventing silent data corruption
- 2Rx8 dual-rank modules let every slot run fully populated at capacity
- 288-pin DDR5 form factor verified for Supermicro H13SRH motherboard
- Lifetime replacement warranty with free US-based technical support included
Exact-Match DDR5 Upgrade for Supermicro H13SRH
This 64GB kit delivers two 32GB DDR5 6400 modules built to the precise rank, voltage and timing the H13SRH memory controller expects. Registered ECC architecture ensures full-capacity recognition at rated speed without manual tuning.
Who This Suits and Who Should Look Elsewhere
Server administrators populating a Supermicro H13SRH with validated RDIMMs will meet the board's population rules immediately. Builders needing UDIMMs, SODIMMs, non-ECC memory or capacities beyond this 64GB kit must select a different product.
Capacity and Headroom
Two 2Rx8 modules provide 64GB of registered ECC memory at 1.1V, handling multi-VM workloads and large datasets with single-bit error correction. The dual-rank design supports full-slot populations, while the fixed 64GB limit means larger memory tiers require a different kit.
Highlights
- Exact-match 64 GB kit runs at DDR5-6400 CL52 1.1 V for full-rated speed
- Registered ECC RDIMM corrects single-bit errors preventing silent data corruption
- 2Rx8 dual-rank modules let every slot run fully populated at capacity
- 288-pin DDR5 form factor verified for Supermicro H13SRH motherboard
- Lifetime replacement warranty with free US-based technical support included
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does my Supermicro H13SRH motherboard need to support DDR5 6400 Registered ECC RDIMMs for this kit to work?
Yes, the H13SRH must accept 288-pin DDR5 RDIMMs at 6400 MT/s with 1.1 V operation and registered ECC; otherwise the modules will not be recognised or run at rated speed.
Can I mix this 2Rx8 6400 CL52 kit with other DDR5 RDIMMs of different rank or speed already installed in the server?
Mixing ranks or speeds forces the memory controller to run all slots at the lowest common speed and may violate the board's population rules, so consult the H13SRH manual for approved configurations.
How can I verify the kit is running at DDR5 6400 CL52 1.1 V with ECC active after installation?
Enter the BIOS or use a tool like dmidecode to confirm each DIMM shows 6400 MT/s, CL52, 1.1 V, registered ECC mode, and the full 64 GB capacity reported without errors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



