NEMIX RAM
NEMIX RAM DDR5 768GB 8x96GB RDIMM 6400 CL52 Supermicro H13DSG-OM
Eight 96 GB DDR5 RDIMMs deliver 768 GB of registered ECC memory at 6400 MT/s CL52 for the Supermicro H13DSG-OM motherboard
- Capacity768GB (8 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB total capacity from eight 96 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- 1 V registered ECC RDIMM reduces controller load and corrects errors
- 2Rx4 dual-rank layout matches Supermicro H13DSG-OM population rules
- 288-pin DDR5 RDIMM form factor fits the board's memory slots exactly
Capacity and purpose
This 768 GB DDR5 kit contains eight 96 GB registered ECC RDIMMs built for the Supermicro H13DSG-OM motherboard. It targets servers that need maximum memory capacity per slot and full population without downclocking. Buyers who need unbuffered UDIMMs or non-ECC modules cannot use this kit.
Thermals and power
Each module runs at 1.10 V with a CL52 latency at DDR5-6400 speed. The registered design reduces electrical load on the memory controller when all eight slots are filled, helping maintain stable operation under sustained workloads. No heat spreaders are fitted, so chassis airflow must be sufficient for bare modules.
Build integration
The 288-pin RDIMM form factor matches the board's slot requirements exactly; UDIMM or SODIMM alternatives will not seat. Population order and maximum supported capacity per slot are defined in the motherboard manual and must be followed. This kit frees all other expansion resources by satisfying memory needs in a single validated configuration.
Highlights
- 768 GB total capacity from eight 96 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- 1 V registered ECC RDIMM reduces controller load and corrects errors
- 2Rx4 dual-rank layout matches Supermicro H13DSG-OM population rules
- 288-pin DDR5 RDIMM form factor fits the board's memory slots exactly
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K8 |
| Capacity | 768GB (8 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 8X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How do I install the 8x96GB RDIMM kit into the Supermicro H13DSG-OM, and which slot population order do people often get wrong?
Install the eight 288-pin RDIMM modules following the motherboard manual's specific population sequence for full 768GB capacity; the common mistake is ignoring the required order for registered ECC DIMMs, which prevents the system from recognising all modules at the rated DDR5 6400 speed.
What maintenance or replacement will the registered ECC RDIMM kit need during its service life?
The modules have no heat spreaders and require no scheduled maintenance; ECC corrects single-bit errors automatically, and if a module fails the lifetime replacement warranty covers a direct swap without servicing the board.
What is the first limit that appears when the 768GB kit runs sustained workloads at CL52?
The primary limit is the fixed CAS latency of 52 cycles at 1.10V; under continuous load the registered buffer and 2Rx4 organisation maintain stability, but latency cannot be reduced beyond the specified CL52 timing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



