We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 768GB 8x96GB RDIMM ECC 6400 CL52 1.1V 2Rx4 288-pin Supermicro H14SHM memory upgrade

SKU CH-X83Q-5ENWW

768 GB DDR5 registered ECC kit with eight 96 GB RDIMMs at 6400 MT/s CL52 1.1 V for Supermicro H14SHM

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 768 GB total capacity from eight 96 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated throughput on supported platforms
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SHM memory slots precisely

Exact-match DDR5 server upgrade

This 768 GB kit contains eight 96 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.10 V operation. Registered ECC architecture and 2Rx4 organization match the Supermicro H14SHM motherboard requirements so every slot runs at full capacity.

Suited for fully populated H14SHM builds

Ideal for administrators expanding a Supermicro H14SHM server to its maximum supported memory with validated rank, voltage and timing parameters. Not intended for boards that require unbuffered UDIMMs, SODIMM form factors or lower-density modules.

Fits registered DDR5 slots on H14SHM

The 288-pin RDIMMs install directly into the motherboard's registered DDR5 channels, offloading the memory controller and enabling ECC error correction across all eight modules. No heat spreaders are included, so chassis airflow must handle thermal management.

Highlights

  • 768 GB total capacity from eight 96 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated throughput on supported platforms
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SHM memory slots precisely

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Does this kit require a Supermicro H14SHM motherboard with 288-pin DDR5 RDIMM slots to operate?

Yes, the 8-module kit is built for the Supermicro H14SHM and uses the 288-pin RDIMM form factor that board expects.

Will the registered ECC design and 2Rx4 organisation work with other registered DDR5 modules already installed in the server?

The modules are registered ECC 2Rx4 at 1.1 V and CL52; mixing different ranks or timings can prevent full-speed operation, so populate all eight slots with this kit for guaranteed stability.

How can I confirm the system sees the full 768 GB at DDR5-6400 with ECC active after installation?

Check the BIOS memory information screen — it should report 768 GB total, 6400 MT/s speed, and ECC enabled for each of the eight 96 GB DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.