SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00498652BTC
In stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 128GB (2x64GB) 5600 CL46 Supermicro H14SST-G memory upgrade
128 GB DDR5 registered ECC kit (2 × 64 GB) at 5600 MT/s CL46 1.1 V for Supermicro H14SST-G
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 128 GB total capacity from a 2 x 64 GB kit
- DDR5-5600 speed rated at PC5-44800 for full bandwidth
- CL46 CAS latency at 1.1 V for stable timing
- Registered ECC RDIMM corrects errors and buffers signals
- Verified fit for Supermicro H14SST-G motherboard
128GB DDR5 ECC RDIMM Kit for Supermicro H14SST-G
This 128GB kit contains two 64GB DDR5 5600 (PC5-44800) Registered ECC RDIMMs built for the Supermicro H14SST-G motherboard. The modules run at 1.1V with CL46 latency and a 2Rx4 organisation, matching the board's memory controller expectations for full-capacity recognition at rated speed. It is intended for server administrators who need to maximise the memory capacity of this specific platform.
Verify Motherboard Population Rules Before Ordering
The Supermicro H14SST-G has defined DIMM population rules and maximum supported capacities per slot that must be followed for stable operation. Consult the motherboard manual to confirm the approved installation order and any capacity limits per channel before installing this 2Rx4 Registered kit. Installing modules in an unsupported sequence can prevent the system from booting or reduce available memory.
Registered ECC Architecture for Fully Populated
The Registered (buffered) design reduces electrical load on the memory controller, allowing all populated slots to run at the rated 5600 speed when fully populated. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The 288-pin RDIMM form factor fits only DDR5 RDIMM slots; it is not compatible with UDIMM or SODIMM sockets.
Highlights
- 128 GB total capacity from a 2 x 64 GB kit
- DDR5-5600 speed rated at PC5-44800 for full bandwidth
- CL46 CAS latency at 1.1 V for stable timing
- Registered ECC RDIMM corrects errors and buffers signals
- Verified fit for Supermicro H14SST-G motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
What comes in the 128GB kit and do I need anything else to install it in a Supermicro H14SST-G?
The kit includes two 64GB DDR5 5600 CL46 2Rx4 1.1V 288-pin ECC registered RDIMMs; no extra parts are required for installation in the Supermicro H14SST-G motherboard.
Should I choose this 2x64GB 5600 CL46 kit or a different capacity for my Supermicro H14SST-G?
This 128GB 2x64GB kit matches the board's DDR5 5600 registered ECC specification; select it when you need the full 128GB capacity, otherwise choose a smaller validated kit that follows the same 2Rx4 1.1V RDIMM profile.
What does the 5600 CL46 rating mean once the modules are running in the server?
The modules will operate at DDR5 5600 MT/s with a CAS latency of 46 cycles at 1.1V, delivering the rated bandwidth and error-correcting stability the Supermicro H14SST-G memory controller expects.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
