We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 64GB 4x16GB 4800 CL40 1.1V 1Rx8 Supermicro H13SST-G memory upgrade

SKU CH-RH5H-ZF52W

A 64 GB DDR5 ECC RDIMM kit of four 16 GB modules running at 4800 MHz CL40 1.1 V, registered for full-capacity stability on the Supermicro H13SST-G motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Show 24 more configurations
  • Exact-match 64 GB kit runs at DDR5-4800 CL40 1.1 V for full rated speed
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 4 × 16 GB 1Rx8 modules populate every slot at full 64 GB capacity
  • 288-pin RDIMM form factor verified for Supermicro H13SST-G motherboard
  • Lifetime replacement warranty with free US-based technical support

64GB DDR5 RDIMM kit for Supermicro H13SST-G

This 64GB kit contains four 16GB DDR5 4800 RDIMMs rated at CL40 and 1.10V. Registered ECC architecture with 1Rx8 organisation matches the Supermicro H13SST-G memory controller for full-capacity recognition at rated speed.

Suited for servers needing registered ECC memory

This kit suits administrators upgrading a Supermicro H13SST-G with validated registered ECC modules. Builders requiring UDIMM, SODIMM or non-ECC memory should look elsewhere, as the board demands 288-pin RDIMMs.

Straightforward 288-pin RDIMM installation

Install by following the motherboard manual for approved population order and capacity limits. Common issues arise when slots are filled out of sequence or when mixed-rank modules prevent the system from posting at full speed.

Highlights

  • Exact-match 64 GB kit runs at DDR5-4800 CL40 1.1 V for full rated speed
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 4 × 16 GB 1Rx8 modules populate every slot at full 64 GB capacity
  • 288-pin RDIMM form factor verified for Supermicro H13SST-G motherboard
  • Lifetime replacement warranty with free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard slot and memory type must my Supermicro H13SST-G have to accept these 288-pin DDR5 RDIMMs?

The kit uses 288-pin DDR5 RDIMM modules, so the board needs DDR5 RDIMM slots — standard for the H13SST-G — and the memory controller must support registered ECC operation.

If I keep existing DDR5 RDIMMs in other slots, will this 1Rx8 CL40 kit run at 4800 MHz alongside them?

The motherboard will clock all populated slots to the lowest common speed and timing; mixing ranks or latencies may force a lower frequency than 4800 MHz.

How can I confirm the full 64 GB kit is detected and running at DDR5-4800 CL40 with ECC active?

Check the BIOS memory summary or OS tools such as dmidecode for 64 GB total, 4800 MT/s data rate, CL40 latency, and ECC status reported as enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.