NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 768GB 12x64GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14DSG-OM memory upgrade
A 768GB DDR5 ECC RDIMM kit of twelve 64GB modules at 6400MHz CL52, registered for full-capacity stability on Supermicro H14DSG-OM
- Capacity768GB (12 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB capacity across 12 modules supports memory-intensive server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput for the platform
- Registered ECC design corrects single-bit errors and buffers every slot
- 1 V operation matches the motherboard's voltage requirement exactly
- 288-pin RDIMM form factor fits the Supermicro H14DSG-OM memory sockets
Purpose-Built Server Memory Kit
This 768GB kit contains twelve 64GB DDR5 RDIMMs rated at 6400MHz with CL52 latency and 1.1V operation. It is designed for administrators upgrading the Supermicro H14DSG-OM motherboard to its maximum supported capacity with registered ECC modules that match the platform's exact rank and timing requirements.
Registered Form Factor and Daily Operation
Each module uses the 288-pin RDIMM form factor with a 2Rx4 organisation, so the memory controller sees a buffered signal across all twelve slots when fully populated. ECC corrects single-bit errors on the fly, while the registered architecture reduces electrical load on the controller, helping the system sustain stability under continuous enterprise workloads.
Upgrade Context and When It Pays Off
This kit replaces smaller or slower DDR5 configurations that leave memory channels partially filled or run at lower data rates. The jump is worth it when your workloads demand the full 768GB capacity at the board's native 6400MHz speed, and when the population rules in the motherboard manual confirm support for twelve 2Rx4 modules at 1.1V.
Highlights
- 768 GB capacity across 12 modules supports memory-intensive server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput for the platform
- Registered ECC design corrects single-bit errors and buffers every slot
- 1 V operation matches the motherboard's voltage requirement exactly
- 288-pin RDIMM form factor fits the Supermicro H14DSG-OM memory sockets
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K12 |
| Capacity | 768GB (12 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 12X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
What DDR5 speed and PC5 rating does this 12-module kit run at?
The kit operates at DDR5 6400 with a PC5-51200 data rate, matching the Supermicro H14DSG-OM memory controller specification.
What physical slot type and module count does the motherboard require for this upgrade?
The H14DSG-OM uses 288-pin RDIMM slots; this kit provides 12 modules of 64 GB each to fill the supported population.
What is the correct installation order for all 12 RDIMMs on the Supermicro H14DSG-OM?
Follow the motherboard manual's DIMM population sequence exactly; the board's memory rules dictate which slots must be filled first for full 768 GB recognition.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
$104.99
0.00133383BTC
In stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
$7.99
0.00010151BTC
In stock