SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00502017BTC
In stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 96GB 2x48GB 5600 CL46 Supermicro H13SSH memory upgrade
96GB DDR5 ECC Registered RDIMM kit (2×48GB) at 5600 CL46 1.1V, validated for Supermicro H13SSH motherboards
- Capacity96GB (2 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 96 GB capacity in a matched 2 x 48 GB kit for full server density
- DDR5-5600 (PC5-44800) speed with CL46 latency for rated throughput
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors
- 10 V operation at 2Rx8 rank matches the motherboard's electrical spec
- Verified 288-pin fitment for the Supermicro H13SSH motherboard
Exact-match DDR5 ECC RDIMM kit
This 96GB kit contains two 48GB DDR5-5600 registered ECC modules built to the Supermicro H13SSH memory controller specification. Each DIMM runs at 1.1V with CL46 timing and a 2Rx8 rank layout so the board recognises the full capacity at rated speed. The 288-pin RDIMM form factor matches the slots this motherboard requires.
Registered architecture and ECC protection
Registered buffering offloads the memory controller, allowing every populated slot to operate at full capacity without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The kit ships as a matched pair to satisfy the board’s population rules.
DDR5-5600 interface limits
The DDR5-5600 (PC5-44800) interface sets the maximum transfer rate this kit can deliver; it cannot exceed the motherboard’s supported memory frequency. Registered DIMMs require a compatible server platform and will not function in consumer UDIMM or SODIMM slots. Verify the H13SSH manual for approved population order and maximum supported capacity before installation.
Highlights
- 96 GB capacity in a matched 2 x 48 GB kit for full server density
- DDR5-5600 (PC5-44800) speed with CL46 latency for rated throughput
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors
- 10 V operation at 2Rx8 rank matches the motherboard's electrical spec
- Verified 288-pin fitment for the Supermicro H13SSH motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Will the 2Rx8 registered DIMMs require any periodic maintenance or replacement?
Registered ECC DIMMs have no scheduled maintenance; they are solid-state components designed to remain in service for the life of the server.
What is the first limit reached when the kit runs at DDR5-5600 CL46 continuously?
The memory controller on the Supermicro H13SSH will hit its maximum supported data rate of 5600 MT/s before any module timing constraint is reached.
How much heat and power does the 96 GB kit draw at 1.10 V under all-day load?
Each 48 GB module operates at 1.10 V with no heat spreader, so total power stays within standard DDR5 RDIMM limits and airflow from the server chassis handles cooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
