BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.00278214BTC
In stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 96GB (6 x 16GB) 5600MHz CL46 1.1V 288-Pin Server Memory Upgrade
A 96GB DDR5 ECC registered RDIMM kit of six 16GB modules running at 5600MHz CL46 and 1.1V, validated for the Supermicro H13SSH-E motherboard
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 96 GB total capacity from six 16 GB modules
- DDR5-5600 speed rated at PC5-44800
- CL46 latency at 1.10 V operating voltage
- Registered ECC design corrects single-bit errors
- Verified fit for Supermicro H13SSH-E motherboard
Exact-fit DDR5 ECC RDIMM kit
This 96GB kit contains six 16GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. Each DIMM runs at 1.1V with CL46 latency and a 1Rx8 organization using major OEM DRAM. The registered design and error-correcting code are engineered for Supermicro H13SSH-E motherboards that require 288-pin RDIMMs.
Registered architecture for full population
Registered buffering reduces electrical load on the memory controller so all six slots can be populated at rated speed without signal degradation. ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The kit arrives as a matched set so no mixing of ranks or voltages is required.
Upgrade from partial or lower-capacity sets
Replacing a partially filled bank or smaller RDIMMs with this six-module kit lets the platform address the full 96GB at DDR5-5600 without down-clocking. The jump is worth it when your workload needs maximum registered ECC capacity and the motherboard manual confirms six-DIMM support at this speed and rank configuration.
Highlights
- 96 GB total capacity from six 16 GB modules
- DDR5-5600 speed rated at PC5-44800
- CL46 latency at 1.10 V operating voltage
- Registered ECC design corrects single-bit errors
- Verified fit for Supermicro H13SSH-E motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Will the 1.10 V operating voltage stay stable when all six 16 GB modules run at 5600 MHz for extended periods?
The kit is specified at 1.10 V and DDR5-5600; registered buffering helps the memory controller maintain those timings across all populated slots.
How much heat do the 288-pin RDIMMs produce without a heat spreader during continuous server workloads?
Modules have no heat spreader; registered ECC DDR5 at 1.10 V typically runs cool enough for standard server airflow, but verify your chassis cooling meets the motherboard's thermal guidelines.
Does the Supermicro H13SSH-E motherboard need a specific BIOS revision or CPU to recognise the full 96 GB 1Rx8 registered ECC kit?
The kit is validated for the Supermicro H13SSH-E; consult that board's manual for approved DIMM population order, supported capacities and any required BIOS version before installing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
