We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 120mm cooling fan 38mm thick with three-pin connector

OEM Industries

OEM Industries 109R1224H1011 120x38mm 24V 0.25A 3-pin CPU cooler

SKU CH-MYM7-0PAAE

A 120 mm square cooling fan with 38 mm depth, 24 V 0.25 A power draw and a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Power Connector3 Pin
  • LEDNo
  • 120 mm frame fits standard mounts
  • 38 mm thickness moves more air per revolution
  • 24 V 0.25 A draws little power
  • 3-pin connector enables speed monitoring
  • SANYO 109R1224H1011 built for inverter cooling

120 mm 24 V square fan for inverter cooling

This OEM Industries cooler is a SANYO 109R1224H1011 square fan measuring 120 mm across and 38 mm thick. It runs on 24 V at 0.25 A and uses a three-pin power connector. The unit is a fan-only assembly intended for inverter or industrial cooling applications.

Black frame with three-wire connector

The black square housing fits standard 120 mm mounting patterns while the 38 mm depth requires sufficient clearance behind the mounting surface. A three-wire lead provides power, ground and tachometer feedback for speed monitoring. No LED lighting is present, keeping the appearance neutral for server or embedded use.

Verify 24 V header and 38 mm depth before ordering

Check that your system supplies a 24 V fan header; a 12 V header will not drive this fan correctly. Confirm the mounting area can accommodate the 38 mm thickness and that the three-pin connector matches the board header pinout. Buyers needing PWM control or a different voltage should look elsewhere.

Highlights

  • 120 mm frame fits standard mounts
  • 38 mm thickness moves more air per revolution
  • 24 V 0.25 A draws little power
  • 3-pin connector enables speed monitoring
  • SANYO 109R1224H1011 built for inverter cooling

Specifications

Model109R1224H1011
ColorBlack
TypeFan only
Fan Size120mm
Power Connector3 Pin
LEDNo

Questions about this item

What does the 3-pin connector mean for speed control on the 109R1224H1011?

The 3-pin connector supplies power and a tachometer signal so the motherboard can monitor RPM, but it lacks a PWM wire so speed is adjusted by varying the 24V voltage instead of a digital pulse-width signal.

Will the 120 mm by 38 mm frame fit my chassis fan mounts?

The fan uses a standard 120 mm square frame that is 38 mm thick, so it matches common 120 mm mounting holes; verify your case or heatsink has clearance for the 38 mm depth before installing.

How do I wire the three leads correctly on the 109R1224H1011?

Connect the red wire to 24V, the black wire to ground and the yellow wire to the motherboard tachometer header; reversing the red and black leads will prevent the fan from spinning and can damage the motor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.