We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120mm sleeve bearing axial fan with two wires

OEM Industries

OEM Industries 2122HSL 120mm Sleeve Bearing Fan 220-240V

SKU CH-VW3Q-J7PWQ

120 mm sleeve-bearing axial fan runs on 220-240 V AC at 50-60 Hz drawing 0.1 A for case or enclosure cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDNo
  • 120 mm axial fan fits standard case mounts
  • Sleeve bearing runs quietly at low current
  • AC 220–240 V 50/60 Hz plugs directly into mains
  • 1 A draw keeps power use minimal
  • Two-wire lead simplifies installation

AC-Powered 120mm Case Fan

The OEM Industries 2122HSL is a 120mm axial cooler that runs directly from 220-240V mains supply at 50-60Hz. It draws 0.1A through a two-wire lead, so no internal power-supply connection is required. The sleeve bearing keeps the motor simple and the unit suits enclosures that need a direct AC airflow source.

Sustained Operation on Mains Voltage

Because the fan is fed from the AC line, its rotational speed stays constant regardless of motherboard PWM curves or system load. The sleeve bearing provides predictable acoustic output during continuous duty cycles typical of server cabinets or industrial chassis. No thermal throttling or voltage droop from a DC rail can alter the airflow once the unit is energised.

Sleeve Bearing Build and Two-Wire Mounting

The black frame houses a sleeve bearing assembly rated for long-running axial cooling in cases or boxes. A two-wire power connector means installation is limited to switched mains or a relay; there is no speed signal or PWM control wire. Builders who need motherboard fan headers, tachometer feedback or variable speed should look elsewhere.

Highlights

  • 120 mm axial fan fits standard case mounts
  • Sleeve bearing runs quietly at low current
  • AC 220–240 V 50/60 Hz plugs directly into mains
  • 1 A draw keeps power use minimal
  • Two-wire lead simplifies installation

Specifications

Model2122HSL
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDNo

Questions about this item

How much power does the 2122HSL draw when running continuously on 220–240 V AC?

The fan is rated at 0.1 A on 220–240 V AC, so it draws very little power even when running all day.

What mains wiring must I already have to connect the two-wire lead?

You need a 220–240 V AC supply at 50–60 Hz with a suitable two-wire connection point; no DC header or adapter is included.

Will the 120 mm frame and sleeve bearing fit the same mounting holes as my existing 12025 fan?

Yes, the 120 mm square frame matches the standard 12025 footprint, so it aligns with the same four mounting holes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.