We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 80mm ball bearing fan with two wires

OEM Industries

OEM Industries FBM-08A12M 80mm 12V 0.16A Ball Bearing CPU Cooler

SKU CH-YW9H-00Y1Y

80 mm ball-bearing fan runs at 12 V and 0.16 A with two wires for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • LEDNo
  • 80 mm square frame fits tight server chassis
  • Ball bearing motor runs reliably at 12 V
  • Low 0.16 A draw keeps power budget low
  • Two-wire lead connects directly to standard headers
  • Panaflo 8025 design built for continuous inverter duty

Compact 80 mm cooling fan

The OEM Industries FBM-08A12M is an 80 mm square fan designed for CPU air cooling or case ventilation in tight spaces. It suits builders maintaining legacy servers, industrial enclosures or small-form-factor systems where an 8025 footprint is required.

Ball-bearing motor with two-wire 12 V power

A ball bearing supports the rotor for consistent rotation over long duty cycles. The black frame carries a standard two-wire lead that draws 0.16 A at 12 V, so it connects directly to a motherboard or fan-controller header without adapters.

Fixed-speed operation limits speed control

Because the fan uses a simple two-wire interface, it runs at a constant voltage with no PWM or voltage-regulation feedback. Systems that need variable fan curves or thermal throttling must rely on external controllers, and the 80 mm diameter restricts airflow compared with larger coolers.

Highlights

  • 80 mm square frame fits tight server chassis
  • Ball bearing motor runs reliably at 12 V
  • Low 0.16 A draw keeps power budget low
  • Two-wire lead connects directly to standard headers
  • Panaflo 8025 design built for continuous inverter duty

Specifications

ModelFBM-08A12M
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
LEDNo

Questions about this item

What connector does the 12 V 0.16 A fan use?

It uses a two-wire lead for 12 V power; the 0.16 A draw is the maximum current the motor will pull.

Will the 80 mm square frame fit my mounting holes?

The frame is an 80 mm square, 25 mm thick, matching the standard 8025 hole pattern used on many server and inverter chassis.

How do I install the ball-bearing fan correctly?

Align the four corner screws with the 8025 mounting holes, orient the airflow arrow toward the heatsink, and secure evenly — over-tightening one corner first can warp the frame.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.