We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OEM Industries

OEM Industries KDE1204PKV2 40mm Mgalev CPU cooler 12V .8W 3 Pin

SKU CH-2SC1-22JG1

A 40mm square cooling fan with Mgalev bearing, 12V 0.8W power and a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeMgalev
  • Power Connector3 Pin
  • LEDNo
  • Mgalev bearing reduces friction for longer service life
  • 40 mm square frame fits tight chassis spaces
  • 12 V 0.8 W draw keeps power consumption low
  • 3 pin connector enables speed monitoring
  • Fan-only design suits custom heatsink mounting

Compact 40 mm Mgalev fan for tight builds

This 40 mm square fan uses Mgalev magnetic-levitation bearings to reduce friction and extend service life. It draws 0.8 W at 12 V through a standard three-pin connector and has no LED lighting. The low-profile 20 mm thickness suits small-form-factor chassis and replacement cooling jobs where space is limited.

Steady airflow under continuous operation

The Mgalev bearing maintains consistent rotational speed during prolonged loads without the wear that degrades sleeve or ball bearings over time. At 0.8 W power draw the motor produces stable airflow for sustained thermal management rather than short bursts. Three-pin voltage control allows the motherboard to adjust speed as temperatures rise.

Quiet thermals with minimal power draw

Magnetic levitation eliminates mechanical contact noise so the fan runs quietly during normal use. The 12 V 0.8 W rating keeps heat output from the fan itself low while delivering adequate cooling for compact heatsinks. No integrated lighting reduces electrical load further and avoids unwanted glow in dark enclosures.

Highlights

  • Mgalev bearing reduces friction for longer service life
  • 40 mm square frame fits tight chassis spaces
  • 12 V 0.8 W draw keeps power consumption low
  • 3 pin connector enables speed monitoring
  • Fan-only design suits custom heatsink mounting

Specifications

ModelKDE1204PKV2
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeMgalev
Power Connector3 Pin
LEDNo

Questions about this item

How much power does the 12 V .8 W Mgalev fan draw when running continuously?

The fan is rated at 0.8 watts on a 12 volt supply, so its continuous draw stays at that level.

Does the 3-pin connector on the KDE1204PKV2 plug straight into a standard motherboard CPU fan header?

Yes, the three-wire lead fits a regular 3-pin or 4-pin CPU fan header and will run at full speed unless the board controls voltage.

Will the 40 mm square frame line up with the mounting holes on a typical 40 mm heatsink?

The 40 mm by 20 mm square frame matches the common 40 mm fan footprint used on many small heatsinks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.