OEM Industries
OEM Industries R128015SU 12V .5A 4 pin fan
12 V, 0.5 A sleeve-bearing fan with four-pin power and orange LED for listed ASUS graphics cards
- Color2-Tone
- TypeFan only
- Bearing TypeSleeve Bearing
- Power Connector4 Pin
- LEDOrange
- 12 V .5 A power draw keeps energy use low
- 4-pin connector enables PWM speed control
- sleeve bearing reduces mechanical noise
- frameless design fits tight GPU clearances
- compatible with ASUS 5830 6670 8600 9800 9600 450 260 cards
Frameless 4-pin VGA cooler
This frameless fan is built as a direct replacement cooler for graphics cards. It targets repair technicians and hobbyists who need to service an older ASUS board without changing the mounting layout. The unit ships new and includes only the fan assembly.
12 V 0.5 A four-wire power spec
The motor draws 0.5 A at 12 V through a standard 4-pin connector, so the card’s existing header can drive it without an adapter. Buyers whose card uses a different voltage or a two- or three-pin header cannot use this cooler.
Orange LED and four-hole mount
An orange LED lights the fan when the system is powered, adding a subtle glow inside the case. The four mounting holes match the reference ASUS models listed, but boards with a different hole pattern or a shrouded heatsink will not accept this frameless design.
Highlights
- 12 V .5 A power draw keeps energy use low
- 4-pin connector enables PWM speed control
- sleeve bearing reduces mechanical noise
- frameless design fits tight GPU clearances
- compatible with ASUS 5830 6670 8600 9800 9600 450 260 cards
Specifications
| Model | R128015SU |
|---|---|
| Color | 2-Tone |
| Type | Fan only |
| Bearing Type | Sleeve Bearing |
| Power Connector | 4 Pin |
| LED | Orange |
Questions about this item
What does the 12V .5A rating mean for actual power draw in my system?
The fan draws up to 0.5 amps at 12 volts, equating to 6 watts maximum load on the motherboard or graphics card header.
How does the 4-pin connector affect speed control compared to a 3-pin header?
The fourth wire carries a PWM signal so the board can vary fan speed precisely; on a 3-pin header it will run at full voltage continuously.
Will the four mounting holes line up with my ASUS EAH5830 or 9600 GTS450 cooler?
Yes, the frameless 8015 frame uses a four-hole pattern matched to the listed ASUS models including the EAH5830 and 9600 GTS450.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ICY DOCK MB882SP-1S-3B 2.5" to 3.5" SATA SSD accessory
- Black
- 1 x 2.5" Drive to 3…
Rosewill RGBF-23001 120mm 5-Pack Case Fan Hub Set
- 5 Fans
- Case Fan
Corsair iCUE QL140 RGB White 140mm case fan CO-9050105-WW
- Case Fan
- Case



