We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square ball-bearing fan with 3-pin connector

OEM Industries

OEM Industries U60R12MLAB-53 60mm Ball Bearing 3-Pin CPU Cooler

SKU CH-83SE-6VQAQ

A 60 mm ball-bearing fan with a 3-pin connector runs at 12 V and 0.05 A for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • NIDEC 6015 motor built for long service life
  • 60 mm frame fits tight chassis spaces
  • 12 V 0.05 A draw keeps power use low
  • Ball bearing reduces friction and noise
  • 3-pin connector enables speed monitoring

Compact 60 mm CPU cooler

The OEM Industries U60R12MLAB-53 is a 60 mm square fan designed for CPU air cooling in tight spaces. It runs on 12 V power and draws 0.05 A through a three-pin connector. The black frame houses a ball bearing for durable rotation. This unit suits builders replacing a failed cooler or assembling a small-form-factor system.

Ball bearing and three-pin mounting

The ball bearing reduces friction compared with sleeve alternatives, helping the fan maintain consistent speed over time. A standard three-pin header supplies power and a tachometer signal so the motherboard can monitor RPM. No LED lighting is present, keeping the appearance neutral. The 15 mm thickness fits many low-profile brackets without modification.

Verify clearance and header type

Measure the available height above the socket to confirm the 15 mm profile clears memory modules and VRM heatsinks. Ensure the motherboard provides a three-pin fan header; a four-pin header will work but PWM control is not supported. Check that the mounting holes match the cooler’s 60 mm spacing before ordering.

Highlights

  • NIDEC 6015 motor built for long service life
  • 60 mm frame fits tight chassis spaces
  • 12 V 0.05 A draw keeps power use low
  • Ball bearing reduces friction and noise
  • 3-pin connector enables speed monitoring

Specifications

ModelU60R12MLAB-53
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Questions about this item

What does the 3-pin connector limit for speed control?

The 3-pin connector provides voltage-based control only; it cannot send PWM duty-cycle signals, so the fan speed range is set by the motherboard's voltage regulation.

What clearance does the 60 mm by 15 mm frame require?

The square 60 mm frame is 15 mm thick, so the mounting surface needs at least 15 mm of depth plus the 60 mm square footprint for the four screw holes.

How is the 3-wire lead connected to the motherboard header?

Align the keyed 3-pin plug with the CPU_FAN header tab, press straight down until seated, and ensure the yellow tachometer wire sits on the monitoring pin so the BIOS reads RPM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.