We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic 2.5 inch SATA drive enclosure with USB 3.0 cable

Orico

Orico 2020U3 2.5" SATA USB 3.0 drive enclosure

SKU CH-FQCC-882GA MPN 2020U3

Tool-free 2.5-inch SATA enclosure with USB 3.0 and UASP for drives up to 6 TB

  • ColorBlack
  • Size2.5"
  • TypeEnclosure
  • AC AdapterNo
  • MaterialPlastic
  • Internal InterfaceSATA I/II/III
  • Tool-free drive swap in seconds with no screws required
  • 5 Gbps USB 3.0 with UASP cuts large-file transfer time
  • Auto-sleep after 10 idle minutes saves drive wear
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB
  • Works on Windows, Mac and Linux without drivers

Tool-free 2.5-inch SATA enclosure

The Orico 2020U3 is a tool-free 2.5-inch enclosure that turns a SATA solid-state drive or hard disk into an external USB 3.0 device. It is aimed at users who want to repurpose an internal laptop drive for portable backup, data migration or media playback without opening a computer case.

USB 3.0 with UASP at 5 Gbps

The single specification that decides fit is the external USB 3.0 Micro-B interface running at 5 Gbps with UASP support. This connection determines the maximum transfer rate and requires a host port that can deliver the same signalling standard for full performance.

Supports drives up to 6 TB capacity

The enclosure accepts 7 mm and 9.5 mm high 2.5-inch SATA I, II or III drives up to 6 TB, so it comfortably handles current high-capacity SSDs and mechanical disks. Drives thicker than 9.5 mm or using the older IDE interface will not fit, and the single-bay design means only one drive can be used at a time.

Highlights

  • Tool-free drive swap in seconds with no screws required
  • 5 Gbps USB 3.0 with UASP cuts large-file transfer time
  • Auto-sleep after 10 idle minutes saves drive wear
  • Fits 7 mm and 9.5 mm SATA drives up to 6 TB
  • Works on Windows, Mac and Linux without drivers

Specifications

BrandORICO
Series2020U3
Model2020U3
ColorBlack
Size2.5"
TypeEnclosure
AC AdapterNo
MaterialPlastic
Internal InterfaceSATA I/II/III
External InterfaceUSB 3.0
HDD Count SupportedSingle HDD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 6TB
Dimensions130.80 x 78.00 x 15.00 mm

Questions about this item

What does the 5 Gbps USB 3.0 speed mean for real-world transfers with a SATA SSD inside?

The USB 3.0 connection runs at 5 Gbps and supports UASP, letting a SATA III SSD reach its native sequential speeds over the link; mechanical drives will be limited by their own platters.

Which SATA revisions does the internal connector accept and what does that cap?

The internal connector accepts SATA I, II and III drives, so any 2.5-inch SATA SSD or HDD up to 6 TB will negotiate at its rated speed without protocol bottlenecks.

What drive heights fit the 130.80 x 78.00 x 15.00 mm shell and how is it secured?

The tray accepts 7 mm and 9.5 mm 2.5-inch SATA drives and uses a tool-free latch, so no screws or adapters are needed to lock the drive in place.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.