We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray two-bay aluminum dock with M.2 and SATA slots, USB-C cable and power adapter

Orico

Orico T18C3 2-Bay NVMe SATA Drive Enclosure 10Gbps

SKU CH-NSQ2-2YD5V

Dual-bay dock for NVMe and SATA drives with one-click offline cloning and 10Gbps USB-C transfer

  • ColorGray
  • SizeM.2 & 2.5/3.5 Dock with Clone
  • TypeDock
  • AC AdapterYes
  • MaterialAluminum / Plastic
  • Internal InterfaceSATA/NVMe
  • Offline clone between SATA and NVMe with one button
  • Dual bay supports 22TB HDD and 8TB SSD
  • 10Gbps USB 3.2 Gen 2 transfer speed
  • Aluminium body with built-in cooling modules
  • Works with Windows, Mac OS, Linux and Android

Dual-bay NVMe and SATA dock for drive migration

The Orico T18C3 accepts one M.2 NVMe M-Key SSD up to 8TB and one 2.5 or 3.5-inch SATA drive up to 22TB. It is built for professionals who need fast offline cloning between the two protocols without a host computer. The enclosure is not for users who require M.2 SATA SSD support or more than two simultaneous drives.

Before ordering check drive protocol and capacity

Verify that the M.2 drive uses an M-Key NVMe interface in 2230, 2242, 2260 or 2280 form factor; M.2 SATA SSDs will not work. Confirm the SATA drive does not exceed 22TB and the NVMe drive does not exceed 8TB. Ensure the target disk is larger than the source disk before starting a clone operation. A 12V3A power adapter is included for stable operation.

Aluminium chassis with cooling modules

The aluminium body and dedicated M.2 heatsink dissipate heat during long copy jobs. A 10-minute sleep timer spins drives down when idle; press the dial to wake the unit. USB 3.2 Gen 2 delivers up to 10Gbps for NVMe and 5Gbps for SATA through the supplied Type-C to Type-A cable.

Highlights

  • Offline clone between SATA and NVMe with one button
  • Dual bay supports 22TB HDD and 8TB SSD
  • 10Gbps USB 3.2 Gen 2 transfer speed
  • Aluminium body with built-in cooling modules
  • Works with Windows, Mac OS, Linux and Android

Specifications

BrandORICO
SeriesT18C3
ModelM.2 SSD Enclosure Dock
Part NumberIT28E-C-US-GY-BP
ColorGray
SizeM.2 & 2.5/3.5 Dock with Clone
TypeDock
AC AdapterYes
MaterialAluminum / Plastic
Internal InterfaceSATA/NVMe
External InterfaceType C
HDD Count SupportedSingle HDD
Number of Bay2 Bay
Maximum Capacity (per Bay)Up to 22TB HDD+Up to 8TB SSD

Questions about this item

What comes in the box and do I need to buy any drives or cables separately?

The enclosure includes a 12 V 3 A power adapter and a 2-in-1 USB Type-C to Type-A cable. You must supply your own M.2 NVMe M-Key SSD (2230/2242/2260/2280) and/or 2.5"/3.5" SATA HDD or SSD; no drives are included.

Which drive types and capacities does each bay actually support?

Bay one accepts M.2 NVMe M-Key SSDs in 2230, 2242, 2260 or 2280 lengths up to 8 TB. Bay two takes 2.5" or 3.5" SATA HDDs or SSDs up to 22 TB. M.2 SATA SSDs are not supported in either bay.

What does the 10 Gbps headline speed mean when I connect the dock to my laptop?

The 10 Gbps (USB 3.2 Gen 2) rate applies only when an NVMe SSD is installed and the host port supports 10 Gbps. With a SATA drive the link tops out at 5 Gbps, and actual throughput will be lower if your computer's USB port is slower.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.