OWC 512GB (8x64GB) DDR4 3200MHz CL22 ECC Registered RDIMM 1.2V 288-pin Server RAM
- 512GB (8 x 64GB)
- 288-Pin DDR4 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
A 128GB dual-channel DDR5 5200 ECC registered RDIMM kit for servers and workstations
Capacity 128GB (2 x 64GB)
This OWC kit delivers 128 GB of DDR5 memory in a dual-channel pair of 64 GB registered DIMMs. It is built for workstations, NAS systems and servers that require ECC error correction and registered signalling. Standard desktop platforms cannot use these modules and they must not be mixed with unbuffered or load-reduced memory.
Each module runs at the JEDEC-standard 1.1 V with a rated speed of DDR5-5200 and CL42 latency. The registered buffer adds a clock cycle of command delay but reduces electrical load on the memory controller, helping stability in densely populated slots. No heat spreaders are fitted, so airflow across the PCB handles thermal dissipation.
The 288-pin DDR5 RDIMM layout fits only motherboards wired for registered ECC memory. Builders must verify that their platform supports 2Rx4 organisation and the PC5-41600 data rate before installation. The kit frees two DIMM slots for the full 128 GB capacity while leaving remaining channels available for further expansion.
| Brand | OWC |
|---|---|
| Part Number | 5R2D52R4128P |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that both 64 GB modules are recognised at 5200 MT/s; the step often missed is seating the second module in the correct channel for dual-channel operation.
No scheduled maintenance is required; the modules run at 1.1 V with no heat spreader, so keep chassis airflow clean and replace only if a memory test reports uncorrectable errors.
The CAS latency of 42 cycles at 5200 MT/s sets the baseline response time; under sustained throughput the memory controller's maximum bandwidth ceiling is reached before thermal limits become a factor.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?