OWC 128GB (8x16GB) DDR5 5600 CL46 ECC Registered RDIMM Server RAM
- 128GB (8 x 16GB)
- 288-Pin DDR5 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
A 128 GB DDR5 registered ECC module running at 5600 MT/s with CL46 latency and 1.1 V operation
Capacity 128GB
This OWC module delivers 128GB of DDR5 server memory in a single registered DIMM. It targets workstations and servers that require ECC protection and registered signalling for data integrity. Standard desktop platforms cannot use this module, and it must not be mixed with unbuffered or load-reduced memory.
The 288-pin RDIMM follows JEDEC and ROHS standards for warranty-safe installation in qualified systems. A 4Rx4 organisation and CL46 latency define its electrical interface, while the absence of a heat spreader keeps the profile low for dense server chassis. Matching capacity, speed and vendor across all slots is recommended for optimal operation.
Operating at 1.1V, the module draws minimal power for its density, reducing thermal load in multi-DIMM configurations. Without a spreader, airflow across the PCB becomes the primary cooling path, so adequate case ventilation is necessary. Registered buffering adds negligible latency while stabilising the memory bus under sustained server workloads.
| Brand | OWC |
|---|---|
| Part Number | 5R6D54R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the DDR5 5600 rating corresponds to a PC5-44800 data rate, which is the maximum standard bandwidth for this module.
It requires a standard 288-pin DDR5 DIMM slot on a server or workstation motherboard that supports registered ECC memory.
Align the notch with the DDR5 key in the slot, press firmly until the latches click, and verify the platform supports registered ECC RDIMMs — not unbuffered or load-reduced types.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?