OWC 8GB (2x4GB) DDR3 1600 CL11 1.5V SODIMM Kit
- 8GB (2 x 4GB)
- 204-Pin DDR3 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
16 GB dual-channel DDR3L 1600 kit runs at 1.35 V with CL11 latency for laptops, mini PCs and NAS systems
Capacity 16GB (2 x 8GB)
This 16GB kit contains two 8GB DDR3L SODIMM modules rated at 1600MHz with CL11 latency. It targets laptops, all-in-one PCs and NAS units that use 204-pin DDR3L slots and run at 1.35V. The unbuffered, non-ECC design matches mainstream mobile platforms.
Each module follows JEDEC PC3L-12800 specifications and is RoHS compliant, so the kit qualifies as a warranty-safe upgrade for OEM systems. The 1.35V operating voltage reduces power draw compared to standard 1.5V DDR3, helping thermal headroom in compact chassis. No heat spreaders are fitted, keeping the profile slim for tight SODIMM sockets.
Systems shipping with a single 4GB or 8GB stick gain dual-channel bandwidth and double the capacity by installing this pair. The jump is worthwhile when multitasking with many browser tabs, office suites or light virtual machines on DDR3L-era hardware. Buyers needing more than 16GB or a faster memory standard cannot use this kit.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R8016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is rated for DDR3L 1600, which equals a PC3L-12800 data rate of 1600 MT/s. Your system will clock it to the highest speed both the memory controller and the modules support, typically 1600 MT/s at CL11.
Each module uses the standard 204-pin DDR3 SO-DIMM form factor. It fits any laptop, mini-PC or NAS slot keyed for DDR3L 1.35 V unbuffered memory.
Align the notch on the module with the key in the socket, press the stick in at a slight angle until the gold contacts disappear, then press down firmly until the side clips snap into the notches on both edges.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?