We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 ECC Registered RDIMM memory upgrade

SKU CH-NE2X-85F5F

16 GB DDR3L ECC registered dual-rank kit for Dell PowerEdge R320, R415, R420, R420XR and R515 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data errors in critical workloads
  • Dual 8 GB modules deliver 16 GB total capacity for demanding applications
  • DDR3L 1600 CL11 at 1.35 V balances speed with lower power draw
  • Validated for Dell PowerEdge R320, R415, R420, R420XR and R515 servers
  • 240-pin RDIMM form factor fits registered DIMM slots in workstation and server platforms

Server-specific ECC upgrade

This 16GB kit contains two 8GB DDR3L 1600 CL11 registered DIMMs built for Dell PowerEdge R320 R415 R420 R420XR and R515 servers. The modules run at 1.35V and use a 1Rx4 organisation with ECC error correction. They replace Dell part numbers A7134886 A7545680 RKR5J and SNPRKR5JC/8G.

Not for desktop or unbuffered builds

Buyers upgrading standard desktop PCs or consumer laptops cannot use this memory because it requires a registered ECC platform. Systems that only accept unbuffered non-ECC DIMMs will not post with these modules installed. Mixing this kit with any unbuffered memory is also unsupported.

Registered ECC DDR3L 1600 1.35V 240-pin

The single specification that decides fit is the registered ECC DDR3L 1600 1.35V 240-pin form factor required by the listed PowerEdge models. Only servers that explicitly support this exact combination will recognise and run the kit at its rated speed.

Highlights

  • ECC registered design prevents data errors in critical workloads
  • Dual 8 GB modules deliver 16 GB total capacity for demanding applications
  • DDR3L 1600 CL11 at 1.35 V balances speed with lower power draw
  • Validated for Dell PowerEdge R320, R415, R420, R420XR and R515 servers
  • 240-pin RDIMM form factor fits registered DIMM slots in workstation and server platforms

Specifications

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge R320
Dell PowerEdge R415
Dell PowerEdge R420
Dell PowerEdge R420XR
Dell PowerEdge R515

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1600 MHz speed run at full rate in a Dell PowerEdge R420?

The R420 memory controller supports DDR3L 1600, so both 8 GB modules will operate at the rated 1600 MT/s with CL11 timing.

Does the 240-pin DDR3L RDIMM interface limit total capacity per channel on these servers?

Each 240-pin registered DIMM presents one 1Rx4 load; the R320, R415, R420, R420XR and R515 all accept this density per slot without reducing channel speed.

What clearance is needed above the motherboard for the 1Rx4 modules without heat spreaders?

Bare 240-pin DDR3L RDIMMs are low-profile; they fit the standard 1U and 2U Dell PowerEdge chassis without extra vertical clearance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.