We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connectors, no heat spreader

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM for Dell OptiPlex 5060 5070 7060

SKU CH-DSCE-D2A71

16 GB DDR4 2666 MHz CL19 UDIMM for Dell OptiPlex 5060, 5070 and 7060 desktops

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 16GB DDR4 2666MHz CL19 boosts multitasking speed
  • 2V low-voltage design reduces system power draw
  • JEDEC compliant 288-pin UDIMM ensures reliable compatibility
  • Tested for Dell OptiPlex 5060 5070 7060 towers and SFF
  • Backward compatible with 2133MHz and 2400MHz systems

OWC 16GB DDR4 2666MHz UDIMM

This 16GB DDR4 module runs at 2666MHz with CL19 latency and 1.2V operation. It fits the 288-pin UDIMM slots in Dell OptiPlex 5060 Tower, 5070 SFF, 5070 Tower, 7060 SFF and 7060 Tower systems. The unbuffered, non-ECC design matches the JEDEC standard for these platforms.

16GB capacity for multitasking headroom

A single 16GB stick provides ample room for office suites, browser tabs and light creative workloads. The module also operates at 2133MHz and 2400MHz if the system defaults to lower speeds. Systems already at their maximum slot count or requiring registered memory cannot use this kit.

No heat spreader or software bundle

The bare PCB keeps the profile low for tight SFF chassis clearance. OWC supplies a limited lifetime warranty with free technical support and an advanced replacement program. No configuration utilities or lighting software are included or required.

Highlights

  • 16GB DDR4 2666MHz CL19 boosts multitasking speed
  • 2V low-voltage design reduces system power draw
  • JEDEC compliant 288-pin UDIMM ensures reliable compatibility
  • Tested for Dell OptiPlex 5060 5070 7060 towers and SFF
  • Backward compatible with 2133MHz and 2400MHz systems

Specifications

BrandOWC
Part Number2U6D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 5060 Tower
Dell OptiPlex 5070 SFF
Dell OptiPlex 5070 Tower
Dell OptiPlex 7060 SFF
Dell OptiPlex 7060 Tower

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 2666MHz DDR4 UDIMM run with the 2400MHz modules I already have in my OptiPlex 7060?

Yes, the module is backward compatible with 2133MHz and 2400MHz speeds, so it will operate at the lower frequency alongside your existing memory.

How can I verify the 16GB module is recognised at 2666MHz CL19 after installing it in my OptiPlex 5070?

Enter the system BIOS or use a tool such as CPU-Z to confirm the installed capacity shows 16GB, the speed reads 2666MHz (PC4-21300) and the timings report CL19.

Does the 288-pin UDIMM arrive alone, or are any extra parts or tools included for the OptiPlex 5060 upgrade?

Only the memory module is supplied; no brackets, screws or tools are included, so have a Phillips screwdriver ready for the chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.