OWC 16GB DDR4 2933MHz ECC Registered RDIMM 2Rx8 CL21 1.2V 288pin System Specific Memory
- 16GB
- 288-Pin DDR4 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
16GB DDR4 ECC registered RDIMM at 2933MHz CL21 for Supermicro X11 server motherboards
This 16GB DDR4 2933MHz ECC Registered RDIMM is built for Supermicro motherboards including the X11DAC, X11DAi-N, X11DDW-L, X11DDW-NT and X11DGO-T. It delivers 16GB of error-correcting, registered memory at 1.2V with CL21 latency. The module fits 288-pin DDR4 slots in compatible workstations, servers and NAS systems. It will not work in standard desktop computers or alongside unbuffered memory.
This module directly replaces Supermicro part numbers MEMDR416LCL01ER29, MEMDR416LCL03ER29, MEM-DR416LD-ER29, MEMDR416LHL04ER29 and MEMDR416LHL05ER29. The upgrade is worth it when existing registered ECC memory has failed or when expanding capacity within the motherboard's supported limits. It also runs at 2133MHz, 2400MHz and 2666MHz for backward compatibility with slower memory configurations. Do not mix with unbuffered DIMMs.
The single 16GB rank configuration provides 16GB of addressable memory per module, using a 2Rx8 organisation. It comfortably handles multi-threaded server workloads, virtualization and large file caches within the platform's maximum memory ceiling. Headroom ends when all DIMM slots are populated or the motherboard's total capacity limit is reached. Buyers needing more than 16GB per slot or higher frequencies must choose different modules.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DAC Supermicro Motherboard X11DAi-N Supermicro Motherboard X11DDW-L Supermicro Motherboard X11DDW-NT Supermicro Motherboard X11DGO-T |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the module is a 288-pin DDR4 ECC Registered DIMM validated for the X11DAC, X11DAi-N, X11DDW-L, X11DDW-NT and X11DGO-T boards.
Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then power on and verify 2933 MHz operation in BIOS.
The memory is rated for continuous server workloads at 1.2V; replace only if ECC correctable errors rise sharply or the module fails POST, otherwise it runs for the system's service life.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?