We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular memory module with gold edge connectors and black chips on both sides

OWC

OWC 16GB DDR4 3200 CL22 1.2V 288pin UDIMM Dell Inspiron 3020 3020S 3880 3891 3910

SKU CH-GRW5-W0T08

16 GB DDR4 3200 CL22 UDIMM for Dell Inspiron 3020, 3020S, 3880, 3891 and 3910 desktops

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • Boosts PC responsiveness with a 16 GB DDR4 3200 MHz module
  • JEDEC-compliant 1.2 V CL22 timing ensures stable operation
  • Works straight out of the box in Dell Inspiron 3020, 3020S, 3880, 3891 and 3910
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems
  • Unbuffered non-ECC 288-pin UDIMM installs easily in desktop towers

Dell Inspiron compatible 16 GB DDR4 module

This 16 GB DDR4 UDIMM is built for Dell Inspiron 3020, 3020S, 3880, 3891 and 3910 desktops. It targets owners of those systems who need a straightforward capacity increase for everyday workloads. The module is unbuffered, non-ECC and operates at 1.2 V. It is not suited for servers or workstations that require registered or error-correcting memory.

JEDEC DDR4 3200 standard with backward speeds

The stick runs at 3200 MHz (PC4-25600) with a CAS latency of 22. Because it follows the JEDEC DDR4 specification, it will also operate at 2933, 2666, 2400 and 2133 MHz if the platform dictates a lower rate. The 288-pin form factor fits standard desktop DIMM slots only; it cannot be used in laptops or small-form-factor boards that require SO-DIMMs.

Simple DIY installation with common pitfalls

Installation is a typical DIY task: power down, open the case, align the notch and press until the latches click. Problems usually arise when the module is not fully seated, when mixing speeds prevents the system from posting at the higher rate, or when the board's maximum supported capacity per slot is exceeded.

Highlights

  • Boosts PC responsiveness with a 16 GB DDR4 3200 MHz module
  • JEDEC-compliant 1.2 V CL22 timing ensures stable operation
  • Works straight out of the box in Dell Inspiron 3020, 3020S, 3880, 3891 and 3910
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems
  • Unbuffered non-ECC 288-pin UDIMM installs easily in desktop towers

Specifications

BrandOWC
Part Number3U2D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell Inspiron 3020
Dell Inspiron 3020S
Dell Inspiron 3880
Dell Inspiron 3891
Dell Inspiron 3910

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 16 GB stick or add a second one for 32 GB?

The module is a single 16 GB UDIMM; adding a second identical stick gives 32 GB total if your Inspiron has a free slot.

What does the 3200 MHz rating deliver in my Dell?

It runs at 3200 MHz CL22 when the platform supports that speed, otherwise it down-clocks to 2933, 2666, 2400 or 2133 MHz automatically.

Will the PC4-25600 288-pin DDR4 interface work in my Inspiron 3880?

Yes — the 288-pin DDR4 UDIMM matches the 3880’s memory slots and is validated for that model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.