OWC 1TB (8x128GB) DDR4 2933 CL21 4Rx4 LRDIMM for HP Synergy 480/660 Gen10
- 1TB (8 x 128GB)
- 288-Pin DDR4 ECC LR…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
A 1 TB DDR4-2933 ECC load-reduced kit of eight 128 GB modules for HP ProLiant Gen10 servers
Capacity 1TB (8 x 128GB)
This kit supplies 1TB of DDR4 ECC Load Reduced memory across eight 128GB modules. It is built for HP ProLiant DL560 Gen10, DL580 Gen10, DX360 Gen10, DX380 Gen10 and DX560 Gen10 servers that require registered LRDIMM technology. Standard desktop systems cannot use these modules.
The kit delivers eight identical 288-pin LRDIMMs rated at 2933 MT/s with CL21 latency at 1.2V. Installing the full set populates multiple channels at once, letting the memory controller run at its rated speed without mixing ranks or speeds. Each module carries ECC load-reduced buffering for signal integrity in dense configurations.
This memory fits only the listed HP ProLiant Gen10 platforms and replaces specific HP part numbers including P19047 and P11040 series. It will not work with unbuffered or standard registered ECC DIMMs, so all slots in a channel must use the same LRDIMM type. Check your server’s service guide for supported DIMM-per-channel limits and required firmware revisions before ordering.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant DL560 Gen10 HP ProLiant DL580 Gen10 HP ProLiant DX360 Gen10 HP ProLiant DX380 Gen10 HP ProLiant DX560 Gen10 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
These modules have no heat spreader and run at the standard 1.2V JEDEC voltage; in a properly cooled ProLiant chassis they operate within spec for the system lifetime.
The rated speed is 2933 MT/s (PC4-23400) with CL21 timing; the memory controller in the supported Gen10 platforms sets the ceiling, so neither parameter exceeds the other in normal operation.
Each module draws 1.2V at the JEDEC DDR4 LRDIMM current level; total kit power scales with all eight ranks active, and the ProLiant airflow design handles the resulting heat.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?