We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular SODIMM module with black chips and gold contacts

OWC

OWC 2GB DDR3 1600 CL11 1Rx8 1.5V SODIMM memory upgrade

SKU CH-4K0X-XVMEK

2GB DDR3 1600 CL11 SODIMM module upgrades HP Omni 220-1130a, 220-1155xt and 220-1185qd

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boosts responsiveness with 2GB DDR3 1600 CL11 module
  • Guaranteed fit for HP Omni 220-1130a 220-1155xt 220-1185qd
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Simple DIY install with 204-pin SODIMM form factor
  • Reliable unbuffered non-ECC 1Rx8 1.5V operation

2GB DDR3 1600 SODIMM for HP Omni

This 2GB DDR3 1600 CL11 SODIMM module is built for HP Omni 220-1130a, 220-1155xt and 220-1185qd all-in-one PCs. It runs at 1.5V with unbuffered, non-ECC operation and a single 1Rx8 rank. The 204-pin form factor fits the factory memory slots in these specific models.

Upgrade from lower capacity or slower DDR3

The module replaces the original memory stick when the system shipped with less than 2GB or with slower DDR3 speeds. Moving to PC3-12800 CL11 is worthwhile when the board supports 1600MHz and the workload needs more headroom for multitasking. JEDEC and RoHS compliance ensures the upgrade is warranty-safe.

Suits owners of the listed HP Omni models

Buyers with an HP Omni 220-1130a, 220-1155xt or 220-1185qd can install this module directly. Systems that require ECC, registered DIMMs, a different voltage, a higher capacity per slot, or a different DDR generation will not accept this part.

Highlights

  • Boosts responsiveness with 2GB DDR3 1600 CL11 module
  • Guaranteed fit for HP Omni 220-1130a 220-1155xt 220-1185qd
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Simple DIY install with 204-pin SODIMM form factor
  • Reliable unbuffered non-ECC 1Rx8 1.5V operation

Specifications

BrandOWC
Part Number1S6D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP Omni 220-1130a
HP Omni 220-1155xt
HP Omni 220-1185qd

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 204-pin SODIMM fit the HP Omni 220-1130a memory slot?

Yes, the 204-pin DDR3 SODIMM matches the slot used in the HP Omni 220-1130a, 220-1155xt and 220-1185qd all-in-one PCs.

What is the correct orientation when inserting the module into the SODIMM slot?

Align the notch on the module edge with the key in the slot, press firmly until the side clips click, then verify the system reports 2GB at 1600 MHz.

Will the 1.5V DDR3 module need a firmware update or voltage adjustment later?

No, the JEDEC-standard 1.5V DDR3 module runs at its rated voltage without BIOS changes; only replace it if a memory test reports errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.