We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 UDIMM module with black chips

OWC

OWC 2U4D41R804GB 4GB DDR4 2400 CL17 1.2V 288pin UDIMM memory upgrade

SKU CH-RNMP-VME4D

4GB DDR4 2400 CL17 UDIMM upgrade for HP OMEN 880 desktops, JEDEC compliant 1.2V non-ECC memory

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR4 2400 speed delivers PC4-19200 bandwidth for responsive performance
  • CL17 latency at 1.2V balances timing with efficient power draw
  • 288-pin UDIMM form factor fits HP OMEN 880 desktop slots directly
  • JEDEC compliant build ensures warranty-safe upgrade with broad compatibility

4 GB DDR4 2400 UDIMM for HP OMEN

This 4 GB DDR4 2400 CL17 UDIMM is built for HP OMEN 880 desktops including the 880-015na, 880-015rz, 880-016ns, 880-017na and 880-020. It adds memory capacity to systems that need more headroom for everyday multitasking. The module follows JEDEC specifications and runs at 1.2 V without a heat spreader.

DDR4 2400 speed limit

The DDR4 2400 interface caps data transfer at the PC4 19200 rate, so bandwidth tops out at that specification. CL17 latency and single-rank 1Rx8 organisation set the timing boundary for this module. Systems that require ECC or registered memory cannot use this unbuffered non-ECC DIMM.

4 GB capacity and headroom

Four gigabytes suits light office work, web browsing and a modest number of browser tabs. Larger media files, heavy multitasking or modern gaming will exceed the available space and trigger paging to storage. Builders needing more than 4 GB per slot should look for higher-capacity modules.

Highlights

  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR4 2400 speed delivers PC4-19200 bandwidth for responsive performance
  • CL17 latency at 1.2V balances timing with efficient power draw
  • 288-pin UDIMM form factor fits HP OMEN 880 desktop slots directly
  • JEDEC compliant build ensures warranty-safe upgrade with broad compatibility

Specifications

BrandOWC
Part Number2U4D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP OMEN 880-015na
HP OMEN 880-015rz
HP OMEN 880-016ns
HP OMEN 880-017na
HP OMEN 880-020

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 4 GB module or add multiple sticks to reach 8 GB or 16 GB?

This module is a single 4 GB stick. The HP OMEN 880 models listed support multiple DIMM slots, so you can install two or four of these modules to reach 8 GB or 16 GB total capacity.

What does the DDR4 2400 PC4-19200 rating deliver in my OMEN 880?

The module runs at 2400 MT/s with a peak bandwidth of 19200 MB/s. In the OMEN 880 it will operate at the system's maximum supported memory speed, giving you the full throughput the platform allows.

Does the 288-pin DDR4 UDIMM interface limit the speed or voltage?

The 288-pin UDIMM form factor carries the JEDEC-standard 1.2 V supply and the DDR4 2400 signal rate. It does not impose any lower cap; the memory will run at its rated 2400 MT/s as long as the motherboard supports that speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.